Setting Image Search Conditions

Clearing the Search Conditions

You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images.

Select [: Set image search conditions] ().

Set the search conditions.

Turn the dial to select an option.
Turn the dial to set the option.
A checkmark [] (1) is appended to the left of the option. (Specified as the search condition.)
If you select the option and press the button, the checkmark [] will be removed (which cancels the search condition).
After completing the settings, press .

Option	Description
Rating	Displays images with the selected (rating) condition.
Date	Displays images taken on the selected shooting date.
Folder	Displays images in the selected folder.
Protect	Displays images with the selected (protect) condition.
Type of file (1)	Displays images of the selected file type.
Type of file (2)	Displays images of the selected file type.

Apply the search conditions.
- Read the message displayed, then select [OK].
  
  The search condition is applied.
Display the found images.
- Press the button.
  
  Only the images that match the set conditions (filtered) will be played back.
  
  When the images are filtered for display, the screen will have an outer yellow frame (2).

Caution

If no images match the search conditions, cannot be pressed in step 2.
For movies, searches apply to files in the XFVC or CRM folder.

Searching does not apply to movie files in the DCIM folder.

Note

Search conditions may be cleared after operations involving camera power or card changes and editing, adding, or erasing images.
Auto power off time may be extended while the [: Set image search conditions] screen is displayed.

Clearing the Search Conditions

Access the screen in step 2, then press the button to clear all the search conditions.