False Color Settings

Color-coded display in six colors based on the brightness level is shown on the screen during movie recording. This can help you adjust the exposure.

  1. Select [Shooting: False color set.] ().

  2. Select [False color].

    • Select [On].
  3. Adjust the exposure as needed ().

    • Adjust the exposure, referring to false color descriptions in False Color Display if necessary.

False Color Display

False color display is applied to images on the camera screen and viewfinder. You can also check false color display details in [False color index].

Color Meaning
Red White clipping
Yellow Just below white clipping
Pink One stop over 18% gray
Green 18% gray
Blue Just above black clipping
Purple Black clipping
Neutral color Brightness other than above

Caution

  • Colors indicating the brightness level may change when the screen switches between recording standby and movie recording, and under some shooting settings.
  • The following features are not available when the camera is set to use false colors.

    • Auto Lighting Optimizer
    • Zebra display
    • MF peaking
    • Dual Shooting (Still Photos and Movies)

Note

  • With [Shooting: HDMI display] set to [External screen], false color display applies to external monitors connected via HDMI, and no image is displayed on the camera screen.
  • With [Shooting: HDMI display] set to [Live View shooting+External monitor], false color display applies to the camera screen, and external monitors connected via HDMI show the actual image.