Magnified Image Display

Setting the Initial Magnification Ratio
Setting the Initial Magnification Position
Magnification for Subsequent Images

You can magnify display of your captured images.

Magnify the image.
- Magnification is possible at these times: 1. During image playback (single-image display), 2. During image review after shooting, and 3. When the camera is ready to shoot.
- Press the button.
- The magnified view will appear. The position of the magnified area (1) is displayed in the lower right of the screen, along with [].
- To magnify images, turn the dial clockwise.
- To reduce magnification, turn the dial counterclockwise. Index display () can be accessed by turning the dial further (at the times of 1. and 3. only).
Scroll the image.
- Use to scroll around the magnified image.
- With , you can also move the magnified area itself.
- Press the or button to exit magnified view.

Note

To switch to other images while maintaining magnified view, turn the dial (at the times of 1. and 3. only).
Magnification is not available for movies.

Setting the Initial Magnification Ratio

You can set the initial magnification ratio.

Select [: Magnification].
Select [Magnificatn (apx)].
Select an option.
- 2x, 4x, 8x, 10x
  
  Magnified view starts at the selected magnification ratio.
- Actual size
  
  The recorded image's pixels will be displayed at approx. 100%.
- Same as last
  
  Magnified view resumes from the same ratio as the last time you exited magnified view with the or button.

Setting the Initial Magnification Position

You can set the initial magnification position.

Select [: Magnification].
Select [Magnified position].
Select an option.
- From center
  
  Magnified view starts from the center of the screen.
- From focus pt
  
  Magnified view starts from the AF point in focus. If the photo is taken with manual focus, the magnified view starts from the center of the screen.

Magnification for Subsequent Images

You can specify whether to maintain the same position for magnified view or use to the position set in [Magnified position] when displaying subsequent images.

Select [: Magnification].
Select [Maintain position].
Select an option.
- Enable
  
  The current magnified position is maintained when displaying subsequent images in magnified view.
- Disable
  
  The position set in [Magnified position] is used when displaying subsequent images in magnified view.