Copying Images

You can copy the images on one card to the other card to save duplicates.

All images in a folder or on a card can also be copied at the same time.

Caution

For extensive copying, consider using a household power outlet accessory (sold separately).
If the target folder or card already has an image with the same file number, [Skip image and continue], [Replace existing image], and [Cancel copy] are displayed. Select a copying method, then press .
- [Skip image and continue]: Any images with the same file number are skipped and not copied.
- [Replace existing image]: Any images with the same file number (including protected images) are overwritten.
Overwriting images that had print order information () will require you to set the print order information again.
Print order and image transfer information is not included in copies of images.
Shooting is not possible during the copying process. Select [Cancel] before shooting.

Note

Images are copied from the card selected in [: Record func+card/folder sel.] (in either [ Record/play]/[ Record/play] or [ Play]/[ Play]).
Copies of images have the same file name as the original image.
With [Sel.Image], images in multiple folders cannot be copied at the same time. Select images to copy from one folder at a time.
Any voice memos added to images are also copied.

Copying Individual Images

Select [: Image copy].
Select [Sel.Image].
- Check the source and target card numbers and the free space on the target card.
- Select [Sel.Image], then press .
Select the folder.

(1) Number of images in folder

(2) Lowest file number

(3) Folder name

(4) Highest file number
- Select the source folder, then press .
- When selecting the folder, refer to the images displayed at right of the screen.
Select an image to copy.

(1) Total images selected
- Turn the dial to select an image to copy, then press .
- To select another image to copy, repeat step 4.
Press the button.
Select [OK].
- Check the target card, then select [OK].
Select the target folder.
- Select the folder to copy the image to, then press .
- To create a new folder, select [Create folder].
Select [OK].
- Check the information about the source and target card, then select [OK].
- Results are displayed after copying is finished. Select [OK] to return to the screen in step 2.

You can copy all specified images at once by selecting the first and last images in a range as you look at images in the index display.

Select [Range].
Select the folder.
- Select the source folder, then press .
- When selecting the folder, refer to the images displayed at right of the screen.
Specify the range of images.
- Select the first image (start point).
- Next, select the last image (end point). A checkmark [] will be appended to all the images within the range between first and last images.
- To select another image to copy, repeat step 3.
Press the button.
- Images in the specified range are now copied.

You can copy all the images in a folder or on a card at once.

Selecting [Sel. Folder ] or [All images] in [ Playback : Image copy] copies all the images it contains.