Rating Images

Rating Individual Images With the / Button
Rating Individual Images via the Menu
Rating by Specifying the Range
Rating All Images in a Folder or on a Card

You can rate images on a scale of 1–5 ( Rating mark 1 / Rating mark 2 / Rating mark 3 / Rating mark 4 / Rating mark 5 ). This function is called rating.

Rating images can help you organize them.

Rating Individual Images With the / Button

Select the image to be rated.
- Press the button to switch to image playback.
- Turn the dial to select the image to be rated.
Rate the image.
- Press the / button to rate the image.
- To rate another image, repeat steps 1 and 2.

Note

During playback, you can rate images by pressing the / button ().

Rating Individual Images via the Menu

Select [: Rating].
Select [Select images].
Select the image to be rated.
- Turn the dial to select the image to be rated.
Rate the image.
- Press , and a blue highlight frame will appear as shown in the screen shown above.
- Turn the dial to select a rating mark, then press .
- When you append a rating mark to the image, the number beside the set rating will increase by one.
- To rate another image, repeat steps 3 and 4.

Rating by Specifying the Range

While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once.

Select [Select range].
- Select [Select range] in [: Rating].
Specify the range of images.
- Select the first image (start point).
- Next, select the last image (end point). A checkmark [] will be appended to all the images within the range between first and last images.
- To select other images, repeat step 2.
Press the button.
Rate the images.
- Turn the dial to select a rating mark, then select [OK].
  
  All the images in the specified range will be rated (same rating) at once.

Rating All Images in a Folder or on a Card

You can rate all the images in a folder or on a card at once.

Under [: Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.

Turn the dial to select a rating, then select [OK].
When you are not rating images or canceling the rating, select [].
If the search conditions are set with [: Set image search conditions] (), the display will change to [All found images].

If you select [All found images], all the images filtered by the search conditions will be rated as specified.

Note

Values next to ratings are displayed as [###] if more than 1,000 images have that rating.
With [: Set image search conditions] and [: Image jump w/], you can display only the images given a specific rating.