Other Menu Functions


  • Exposure comp.

    Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Manual Exposure Compensation.

  • MovieISO speed settings

    • ISO speed

      In [Movie manual exposure] mode, you can set the ISO speed manually. You can also select ISO Auto.

    • Max for Auto

      You can set the maximum limit for ISO Auto in movie recording in [Movies] mode or in [Movie manual exposure] mode with ISO Auto.

    • Time-lapse movieMax for Auto

      You can set the maximum limit for ISO Auto in time-lapse movie recording in [Movies] mode or in [Movie manual exposure] mode with ISO Auto.

  • HDR shooting HDR PQ

    For details on HDR shooting HDR PQ, see HDR Shooting.

  • Auto Lighting Optimizer

    Brightness and contrast can be corrected automatically. For details on Auto Lighting Optimizer, see Auto Lighting Optimizer.

  • Highlight tone priority

    You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see Highlight Tone Priority.

  • MovieAv 1/8-stop incr.

    • You can set aperture values on a finer scale when recording movies with an RF lens.

      This feature is available when the camera is set to [Movie manual exposure].

      Select [Enable] to change the aperture increment from 1/3 stop (or 1/2 stop) to 1/8 stop.


  • [MovieAv 1/8-stop incr.] is not available (not displayed) when EF or EF-S lenses are used.
  • Movie Auto slow shutter

    You can choose whether to record movies that are brighter and less affected by image noise than when set to [Disable] by automatically slowing the shutter speed under low light.

    Available in [Movies] recording mode. Applies when the frame rate of the movie recording size is 59.94 fps or 50.00 fps.

    • Disable

      Enables you to record movies with smoother, more natural movement, less affected by subject shake than when set to [Enable]. Note that under low light, movies may be darker than when set to [Enable].

    • Enable

      Enables you to record brighter movies than when set to [Disable] by automatically reducing the shutter speed to 1/30 sec. (NTSC) or 1/25 sec. (PAL) under low light.


  • Setting to [Disable] is recommended when recording moving subjects under low light, or when afterimages such as trails may occur.


  • White balance

    For details on white balance, see White Balance.

  • Custom White Balance

    For details on custom white balance, see Custom White Balance.

  • WB correction

    For details on white balance correction, see White Balance Correction.

  • Picture Style

    For details on Picture Styles, see Picture Style Selection.

  • Clarity

    For details on clarity, see Clarity.

  • Lens aberration correction

    Peripheral illumination, distortion, focus breathing, and chromatic aberration can be corrected as you record movies. For details on lens aberration correction, see Lens Aberration Correction.



  • Reverse display

    For details on reverse display, see Reverse Display.

  • VF display format

    For details on the viewfinder display format, see Viewfinder Display Format.

  • Standby: Low res.

    Set to [On] to conserve battery power and control the rise of camera temperature during standby.

    As a result, it may enable you to record movies over a longer period.


  • Image quality on the standby screen may differ from image quality on the screen during movie recording.
  • Briefly when you start recording movies, image display may remain on the current frame instead of being updated.
  • With digital zoom set to an option other than [Disable], overheat control is set to [Off] and cannot be changed ().
  • HDMI display

    You can specify how movies are displayed as they are recorded via HDMI to an external device. Movie output itself corresponds to the [Movie rec. size] setting.

    The default setting is [External screen].

    • Live View shooting+External monitor

      Enables movie display both on the camera screen and on the other device, via HDMI output.

      Camera operations such as image playback or menu display are shown on the other device via HDMI, not on the camera screen.

    • External screen

      Deactivates the camera screen during output via HDMI, so that the screen is blank.

      Shooting information, AF points, and other information is shown on the external device via HDMI, but you can stop output of this information by pressing the INFO button.

      Before recording movies externally, confirm that no information is being sent by the camera by making sure no shooting information, AF points, and so on is displayed on external monitors or other devices.


  • Card recording is not performed with [HDMI display] set to [Live View shooting+External monitor]. Camera menus and image playback are only displayed on the screen connected via HDMI.
  • The HDMI output resolution and frame rate are automatically adjusted to suit the movie recording size.

Troubleshooting For longer HDMI output

To continue HDMI output for longer than 30 min., select [Live View shooting+External monitor], then set [Auto power off] in [Set-up: Power saving] to [Disable] (). HDMI output will continue after the camera screen turns off when the time set in [Screen off] elapses.


  • HDMI output without information prevents display of warnings about the card space, battery level, or high internal temperature () via HDMI.
  • During HDMI output, display of the next image may take some time if you switch between movies of different recording sizes or frame rates.
  • Avoid operating the camera when recording movies to external devices, which may cause information to be displayed in the HDMI video output.
  • Brightness and color of movies recorded with the camera may look different from that of HDMI video output recorded by external devices, depending on the viewing environment.


  • By pressing the INFO button, you can change the information displayed.
  • Time codes can be added to HDMI video output ().
  • Audio is also output via HDMI, except when [Sound rec.] is set to [Disable].