Cropping JPEG/HEIF Images

You can crop a captured JPEG or HEIF image and save it separately. RAW images and frame-grab images from 4K movies cannot be cropped.

Select [: Cropping].
Select an image.
- Use the keys to select an image to crop.
- Press the button to display the cropping frame.
Set the cropping frame.
- The image area within the cropping frame will be cropped.
- Resizing the cropping frame size
  
  Press the button to resize the cropping frame. The smaller the cropping frame, the more magnified the cropped image will look.
- Correcting tilt
  
  You can correct image tilt by ±10°. Turn the dial to select [], then press the button. While checking tilt relative to the grid, turn the dial (in 0.1° increments) or tap the left or right arrow (in 0.5° increments) in the upper left of the screen to correct tilt. After correction is finished, press the button.
- Changing the cropping frame aspect ratio and orientation
  
  Turn the dial and select []. Each press of the button changes the cropping frame aspect ratio.
- Moving the cropping frame
  
  Press the keys to move the frame vertically or horizontally.
Check a preview of the cropped image.
- Turn the dial to select [], then press the button. The image area to crop is displayed.
Save.
- Turn the dial to select [], then press the button.
- Select [OK] to save the cropped image.
- Check the destination folder and image file number, then select [OK].
- To crop another image, repeat steps 2 to 5.

Caution

The position and size of the cropping frame may change depending on the angle set for tilt correction.
Once a cropped image is saved, it cannot be cropped again or resized.
AF point display information () and Dust Delete Data () will not be appended to the cropped images.