Movie Playback

  1. Switch to playback.

    • Press the Playback button.

  2. Select a movie.

    • Turn the Quick control dial 1 dial to select a movie to play.
    • In single-image display, the [SET buttonMovie files] icon displayed in the upper left of the screen indicates a movie.
    • In index display, perforations at the left edge of a thumbnail indicate a movie. Movies cannot be played back from index display, so press SET to switch to single-image display.

  3. In the single-image display, press SET.

  4. Play the movie.

    • Press SET or tap [].
    • The movie will start playing back. Sound is played through the speaker (1).
    • You can pause playback and display the movie playback panel by pressing SET. Press it again to resume playback.
    • Turn the Main dial dial to adjust the volume (even during playback).

Movie playback panel

Item Playback Operations
Skip backward Skips backward approx. 1 sec. each time you press Multi-controller left. Holding Multi-controller to the left rewinds the movie.
Previous frame Displays the previous frame each time you turn the Quick control dial 1 dial left.
Play Pressing SET toggles between playback and stop.
Next frame Displays the next frame each time you turn the Quick control dial 1 dial right.
Skip forward Skips forward approx. 1 sec. each time you press Multi-controller right. Holding Multi-controller to the right fast-forwards the movie.
Playback position
hh:mm:ss Playback time (hours:minutes:seconds, when [Movie play count] is set to [Rec time])

hh:mm:ss.ff (DF)

hh:mm:ss:ff (NDF)

 Time code (hours:minutes:seconds:frames, when [Movie play count] is set to [Time code])
Volume

Turn the Main dial dial to adjust the speaker volume ().

You can also adjust the volume by pressing Multi-controller vertically.
Press the Q (Quick Control) button to go to the next screen ().
Return Press the MENU button to return to single-image display.

Controls not on the previous screen are as follows.

Item Playback Operations
Slow motion Adjust the slow motion speed by turning the Quick control dial 1 dial. The slow motion speed is indicated in the upper right of the screen.
Frame Grab Available when you play 4K movies. Enables you to extract the current frame and save it as a JPEG or HEIF still image ().
Return Press the MENU button to return to the previous screen.

Caution

  • Adjust the volume using television controls when the camera is connected to a television for movie playback (), because volume cannot be adjusted by pressing Multi-controller up or down.
  • Movie playback may stop if the card's read speed is too slow or movie files have corrupted frames.