Image Quality

Note

  • “Image quality” in this guide refers to both image size and JPEG/HEIF quality ().

Image Size Selection

You can specify Large, Medium, Small 1, or Small 2 for JPEG/HEIF images and RAW or Compact RAW for RAW images.

Note

  • HEIF is available when [Shooting: Picture styleHDR shooting (PQ)] is set to [HDR PQ]. You can convert these images to JPEG images after shooting ().

  1. Select [Shooting: Img type/size] ().

    • The screen displayed varies depending on [Stills Rec options] settings in [Set-up: Record func+card/folder sel.].

  2. Set the image size.

    Standard/Auto switch card/Record to multiple

    • For RAW images, turn the Main dial dial to select the size, and for JPEG/HEIF images, turn the Quick control dial 1 dial.
    • Press SET to set it.

    Record separately

    • When [Stills Rec options] in [Set-up: Record func+card/folder sel.] is set to [Rec. separately], turn the Quick control dial 1 dial to select [Card 1] or [Card 2], then press SET. Note that recording separately to RAW and Compact RAW is not available for RAW images.
    • Select an image size on the screen displayed, then press SET.

Note

  • Large is set if you set both RAW and JPEG/HEIF to [Dash].
  • Two versions of each shot are recorded at your specified image quality when you have selected both RAW and JPEG/HEIF. Both images have the same file number but each has a different file extension, with .JPG for JPEG, .HIF for HEIF and .CR3 for RAW.
  • To record in different image quality to each card (as a RAW and JPEG image, for example), set [Stills Rec options] in [Set-up: Record func+card/folder sel.] to [Rec. separately].
  • Meanings of image size icons are as follows: : RAW, : Compact RAW, JPEG: JPEG, HEIF: HEIF, : Large, : Medium, : Small 1, : Small 2.

RAW Images

RAW images are raw data from the image sensor in a digital form.

Compared to RAW image files, Compact RAW offers smaller file sizes.

To process RAW images and save them as JPEG or HEIF images, you can use [Playback: RAW image processing] () or Digital Photo Professional (EOS software).

For details on Digital Photo Professional, refer to the Digital Photo Professional instruction manual.

Note

  • To view RAW images on a computer, consider using Digital Photo Professional (DPP).
  • RAW images from this camera cannot be used with older versions of DPP. Download the latest version of DPP from the Canon website and install it, which will overwrite the previous version ().
  • Commercially available software may not be able to display RAW images captured by this camera. For compatibility information, contact the software manufacturer.

Guide to Image Quality Settings

See Still photo file size / Number of shots available / Maximum burst for continuous shooting for details on file size, number of shots available, maximum burst, and other estimated values.

Maximum Burst for Continuous Shooting

The approximate maximum burst is displayed at the upper left of the shooting screen and lower right of the viewfinder.

Note

  • If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously. Fewer shots are available for a value of 98 or lower, and when [BUSY] is displayed on the screen, internal memory is full and shooting will stop temporarily. If you stop continuous shooting, the maximum burst will increase. After all captured images have been written to a card, you can once again shoot at the maximum burst listed in Still photo file size / Number of shots available / Maximum burst for continuous shooting.

JPEG/HEIF Quality

  1. Select [Shooting: JPEG/HEIF quality] ().

  2. Select the desired image size.

    • Select the image size, then press SET.

  3. Set the desired quality (compression).

    • Select the number, then press SET.
    • Higher numbers offer higher quality (lower compression).
    • Quality of 6–10 is indicated by Fine, and 1–5, by Normal.

Note

  • The higher the quality, the fewer shots will be available. In contrast, the lower the quality, the more shots will be available.