Still Photo Cropping/Aspect Ratio
Normally with RF or EF lenses, images are captured at the sensor size of approx. 36.0×24.0mm in full-frame shooting, but in cropped shooting, you can isolate and magnify the center of the image approx. 1.6 (APS-C size) as if using a telephoto lens, or you can set an aspect ratio as needed before shooting. RF-S and EF-S lenses capture a 3:2 area in the center at an approx. 1.6 crop factor (APS-C size).
-
Select [: Cropping/aspect ratio].
-
Select an option.
- Select [Full-frame], [1.6x (crop)], [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)].
- With RF-S and EF-S lenses, [1.6x (crop)] is set automatically, and no other option is available.
- To proceed without changing shooting area display, press and go to step 4.
-
Select how the shooting area is displayed.
- On the screen in step 2, press the button.
- Select the type of display, then press .
Caution
- /// image quality options are not available when [1.6x (crop)] is set, or with RF-S or EF-S lenses.
- Shooting with [1.6x (crop)] and image quality set to /// produces /// images, respectively.
- Shooting with an RF-S or EF-S lens when [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set automatically clears the setting and shoots with [1.6x (crop)] at a 3:2 aspect ratio.
-
Take the picture.
Setting examples
When is set
When is set or an RF-S or EF-S lens is used
When / is set
When / is set
- When [1.6x (crop)] is set or an RF-S or EF-S lens is used, an image magnified approx. 1.6 is displayed.
- When [1:1 (aspect ratio)], [4:3 (aspect ratio)], or [16:9 (aspect ratio)] is set, the image within the black masked or outlined area is captured.
Caution
- Areas outside the cropped area are not recorded in RAW shooting when [1.6x (crop)] is set, or with RF-S or EF-S lenses.
- [Shooting area] has no effect on display when [1.6x (crop)] is set, or with RF-S or EF-S lenses.
- [: Add cropping information] is only available when [Full-frame] is set.
- When external flash units are used, flash auto zoom (automatic adjustment of flash coverage) based on the [: Cropping/aspect ratio] setting is not performed.
Note
- For details on pixel counts when cropping or an aspect ratio is set, see Still photo pixel count.
- Nearly 100% field of view coverage is maintained vertically and horizontally when cropping or an aspect ratio is set.
- Aspect ratio information is added to RAW images when an aspect ratio is set, which are captured at full size. When the RAW images are played back, the image area used for shooting is indicated by lines. Note that only the shooting image area is shown in Slide Show.