Fv: Flexible-Priority AE
In this mode, you can set shutter speed, aperture value, and ISO speed manually or automatically and combine these settings with your choice of exposure compensation. Shooting in [] mode, with control over each of these parameters, is equivalent to shooting in [
], [
], [
], or [
] mode.
[] stands for Flexible value.
-
Set the shooting mode to [
].
- Press the
button, then turn the
dial to select [
].
- Press the
-
Set the shutter speed, aperture value, and ISO speed.
- Turn the
dial to select an item to set. [
] appears to the left of the selected item.
- Turn the
dial to set the option.
- To reset the setting to [AUTO], press the
button.
- Turn the
-
Set the amount of exposure compensation.
- Turn the
dial and select the exposure level indicator. [
] appears to the left of the exposure level indicator.
- Turn the
dial to set the option.
- To reset the setting to [±0], press the
button.
- Turn the
Combinations of functions in [] mode
Shutter Speed | Aperture Value | ISO Speed | Exposure Compensation | Shooting Mode |
---|---|---|---|---|
[AUTO] | [AUTO] | [AUTO] | Available | Similar to [ |
Manual selection | ||||
Manual selection | [AUTO] | [AUTO] | Available | Similar to [ |
Manual selection | ||||
[AUTO] | Manual selection | [AUTO] | Available | Similar to [ |
Manual selection | ||||
Manual selection | Manual selection | [AUTO] | Available | Similar to [ |
Manual selection | – |
Caution
-
Blinking of the values indicates a risk of underexposure or overexposure. Adjust the exposure until the value stops blinking.
Slow synchro is not used under low light when you have set up [
] mode to resemble [
] or [
] mode, even when [Slow synchro] in [
: External Speedlite control] is set to [1/250-30sec. auto] (or [1/200-30sec. auto]).
Note
- Values for shutter speed, aperture value, and ISO speed that are set to [AUTO] are underlined.
- You can set shutter speed, aperture value, and ISO speed to [AUTO] and exposure compensation amount to [±0] in step 2 or 3 by holding down the
button.