Rating Images
- Rating Individual Images With the
Button - Rating Individual Images via the Menu
- Rating by Specifying the Range
- Rating All Images in a Folder or on a Card
You can rate images on a scale of 1–5 (
/
/
/
/
). This function is called rating.
Rating images can help you organize them.
Rating Individual Images With the 
Button
-
Select the image to be rated.
- Press the
button to switch to image playback. - Turn the
dial to select the image to be rated.
- Press the
-
Rate the image.
- Press the button to rate the image, after which a message is displayed on the screen.
- To rate another image, repeat steps 1 and 2.
- Press the
Note
- In the detailed settings for [Rating (Hold:
(rec memo))] in [: 
/ button function], you can select the rating to apply.
Rating Individual Images via the Menu
-
Select [
: Rating].
-
Select [Select images].
-
Select the image to be rated.
- Turn the dial to select the image to be rated.
- Turn the
-
Rate the image.
- Press
, and a blue highlight frame will appear as shown in the screen shown above. - Turn the dial to select a rating mark, then press .
- When you append a rating mark to the image, the number beside the set rating will increase by one.
- To rate another image, repeat steps 3 and 4.
- Press
Rating by Specifying the Range
While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once.
-
Select [Select range].
- Select [Select range] in [: Rating].
- Select [Select range] in [
-
Specify the range of images.
- Select the first image (start point).
-
Next, select the last image (end point).
A checkmark [
] will be appended to all the images within the range between first and last images.
-
Press the
button. -
Rate the images.
-
Turn the
dial to select a rating mark, then select [OK].All the images in the specified range will be rated (same rating) at once.
-
Rating All Images in a Folder or on a Card
You can rate all the images in a folder or on a card at once.
- Under [: Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.
- Turn the dial to select a rating, then select [OK].
- When you are not rating images or canceling the rating, select [
]. - If the search conditions are set with [: Set image search conditions] (), the display will change to [All found images].
- If you select [All found images], all the images filtered by the search conditions will be rated as specified.
Note
- Values next to ratings are displayed as [###] if more than 1,000 images have that rating.
- With [: Set image search conditions] and [: Image jump w/
], you can display only the images given a specific rating.