IBIS High-Resolution Shooting

In IBIS (In-Body Image Stabilizer) high-resolution shooting, nine consecutive shots are combined into a single image, enabling JPEG shooting with a higher resolution than usual.

  1. Select [Shooting: IBIS High resolution shot].

  2. Select [Enable].

  3. Take the picture.

    • When you press the shutter button completely, nine images are captured continuously and combined into a single image that is recorded to the card.

Caution

  • The composite image is JPEG FineLarge quality.
  • Flash photography is not available.
  • IS mode is disabled.
  • IS mode is also disabled for IS-equipped lenses, even with IS set to ON.
  • IBIS high-resolution shooting is not available for the following lenses.
    • EF-S lenses
    • RF-S lenses
    • RF5.2mm F2.8 L DUAL FISHEYE
  • For best results, shoot subjects that are not moving. Subjects in motion or camera vibration blur may cause mesh-like artifacts in some image areas.
  • Subject edges or other details may look unnatural if camera vibration blur occurs as you shoot (caused by vibration where the camera is set up, for example).
  • Use a sturdy tripod that can bear the weight of the shooting equipment. Mount the camera securely on the tripod.
  • Using the self-timer (), a remote switch (sold separately, ), or wireless remote control (sold separately, ) is recommended.
  • Bands of light may be displayed and captured images may be affected by light and dark banding if you shoot under flickering light sources. In this case, consider shooting at a slower shutter speed.
  • It takes some time to record to the card, because images are merged after shooting. [BUSY] appears on the screen as images are processed, and shooting is not possible until processing is finished.
  • It takes some time to display images that were captured using this feature. It may be more convenient to review the images on a computer.

Note

  • Details such as shutter speed, aperture value, and ISO speed are determined by conditions for the first shot.
  • [IBIS High resolution shot] reverts to [Disable] when the power switch is set to Power off.