Magnified Image Display

You can magnify display of your captured images.

  1. Magnify the image.

    • Turn the Quick control dial 2 dial clockwise.
    • The magnified view will appear. The position of the magnified area (1) is displayed in the lower right of the screen, along with [Quick control dial 2Magnify or reduce].
    • To magnify images, turn the Quick control dial 2 dial clockwise.
    • To reduce magnification, turn the Quick control dial 2 dial counterclockwise. For index display (), keep turning the dial.
  2. Scroll the image.

    • Use Multi-controller to scroll around the magnified image.
    • Press the Magnify or reduce or MENU button to exit magnified view.

Note

  • To switch to other images while maintaining magnified view, turn the Quick control dial 1 dial.
  • Magnification is not available for movies.

Setting the Initial Magnification Ratio and Position

You can set the initial magnification ratio and magnified position by selecting [Playback: Magnificatn (apx)].

  • 2x, 4x, 8x, 10x (magnify from center)

    The magnified view starts at the image center at the selected magnification ratio.

  • Actual size (from selected pt)

    The recorded image’s pixels will be displayed at approx. 100%. The magnified view starts at the AF point that achieved focus. If the photo is taken with manual focus, the magnified view starts at the image center.

  • Same as last magnif. (from ctr)

    The magnification will be the same as the last time you exited the magnified view with the Playback or Magnify or reduce button. The magnified view starts at the image center.