Quick Start Guide

  1. Insert the battery ().

    • Upon purchase, charge the battery to start using ().
  2. Insert the card ().

    • With the card's label facing toward the back of the camera, insert it into the card slot.
  3. Attach the lens ().

    White index

    Red index

    • Align the mount indexes on the lens and camera (red or white) to attach the lens.
  4. Set the lens's focus mode switch to Autofocus ().

  5. Set the power switch to ON, then set the Mode dial to Scene Intelligent Auto (, ).

    • All the necessary camera settings will be set automatically.
  6. Flip out the screen ().

    • When the [Date/Time/Zone] setting screen is displayed, see page Date/Time/Zone.
  7. Focus on the subject ().

    • Look through the viewfinder and center the subject on the screen.
    • Press the shutter button halfway, and the camera will focus on the subject.
    • If Flash blinks in the viewfinder, manually raise the built-in flash.
  8. Take the picture ().

    • Press the shutter button completely to take the picture.
  9. Review the picture.

    • The image just captured will be displayed for approx. 2 sec. on the screen ().
    • To display the image again, press the Playback button ().