Information Display

Still Photo Shooting Screen

Each time you press the INFO button, the information display will change.

  • The display will show only the settings currently applied.
  1. (1) Maximum burst
  2. (2) Number of available shots/Sec. until self-timer shoots
  3. (3) Focus bracketing/HDR shooting/Multi Shot Noise Reduction
  4. (4) Shooting mode
  5. (5) AF area
  6. (6) AF operation
  7. (7) Subject to detect
  8. (8) Metering mode
  9. (9) Image quality
  10. (10) ND filter
  11. (11) Electronic level
  12. (12) AF point (1-point AF)
  1. (13) Release AE Lock
  2. (14) Number of remaining shots for focus bracketing
  3. (15) Movie recording time available
  4. (16) Battery level
  5. (17) Quick Control button
  6. (18) White balance/White balance correction
  7. (19) Picture Style
  8. (20) Creative filters
  9. (21) Still image aspect ratio
  10. (22) GPS
  11. (23) Exposure simulation
  12. (24) Histogram (Brightness/RGB)
  1. (25) Drive mode
  2. (26) HDR PQ
  3. (27) Flash ready/FE lock/High-speed sync
  4. (28) Accessory attached indicator
  5. (29) Electronic shutterElectronic shutter
  6. (30) Touch Shutter
  7. (31) Shutter speed
  8. (32) Aperture value
  9. (33) Overheating warning
  1. (34) Still photo image quality warning
  2. (35) Cooling fan
  3. (36) AEB/FEB
  4. (37) Wi-Fi function
  5. (38) Wi-Fi signal strength
  6. (39) Bluetooth function
  7. (40) ISO speed
  8. (41) Highlight tone priority
  9. (42) Exposure level indicator/Exposure compensation

Note

  • You can specify the information displayed in response to pressing the INFO button ().
  • The electronic level is not displayed when the camera is connected via HDMI to a television.
  • Other icons may be displayed temporarily after setting adjustments.

Movie Recording Screen

Each time you press the INFO button, the information display will change.

  • The display will show only the settings currently applied.
  1. (1) Battery level
  2. (2) Movie recording time available/Elapsed recording time
  3. (3) Shooting mode
  4. (4) AF area
  5. (5) Subject to detect
  6. (6) Movie recording size
  7. (7) ND filter
  8. (8) Headphones
  9. (9) Microphone
  10. (10) Electronic level
  1. (11) AF point (1-point AF)
  2. (12) Movie digital IS
  3. (13) Histogram (Brightness/RGB)
  4. (14) Quick Control button
  5. (15) Movie shooting button
  6. (16) White balance/White balance correction
  7. (17) Picture Style
  8. (18) Creative filters
  9. (19) Digital zoom
  10. (20) GPS
  1. (21) Cooling fan
  2. (22) HDR PQ
  3. (23) Audio recording level indicator (manual)
  4. (24) Overheat control
  5. (25) Movie self-timer
  6. (26) Movie Servo AF
  7. (27) AE lock
  8. (28) Shutter speed
  9. (29) Aperture value
  1. (30) Wi-Fi function
  2. (31) Wi-Fi signal strength
  3. (32) Bluetooth function
  4. (33) Digital zoom
  5. (34) ISO speed
  6. (35) Highlight tone priority
  7. (36) Exposure compensation
  8. (37) Exposure level indicator (metering levels)

Caution

  • You can specify the information displayed in response to pressing the INFO button ().
  • The electronic level is not displayed when the camera is connected via HDMI to a television.
  • The electronic level, grid lines, and histogram cannot be displayed during movie recording (and if they are currently displayed, recording a movie will clear the display).
  • When movie recording starts, the movie recording remaining time will change to the elapsed time.

Note

  • Other icons may be displayed temporarily after setting adjustments.

Scene Icons

In Scene Intelligent Auto shooting mode, the camera detects the type of scene and sets all settings accordingly. The detected scene type is indicated in the upper left of the screen.

Subject

Background

 People Subjects Other Than People Background Color
In Motion*1 Nature/Outdoor Scene In Motion*1 Close
Bright Portrait (bright) Portrait with motion (bright) Nature/outdoor scene (bright) Non-portrait with motion (bright) Close non-portrait (bright) Gray
Backlit Portrait (bright/backlit) Portrait with motion (bright/backlit) Nature/outdoor scene (bright/backlit) Non-portrait with motion (bright/backlit) Close non-portrait (bright/backlit)
Blue Sky Included Portrait (blue sky included) Portrait with motion (blue sky included) Nature/outdoor scene (blue sky included) Non-portrait with motion (blue sky included) Close non-portrait (blue sky included) Light blue
Backlit Portrait (blue sky included/backlit) Portrait with motion (blue sky included/backlit) Nature/outdoor scene (blue sky included/backlit) Non-portrait with motion (blue sky included/backlit) Close non-portrait (blue sky included/backlit)
Sunset – – Non-portrait (sunset) – – Orange
Spotlight Portrait (spotlight) Non-portrait (spotlight) Close non-portrait (spotlight) Dark blue
Dark Portrait (dark) Non-portrait (dark) Close non-portrait (dark)
With Tripod*1 Portrait (dark/tripod used)*2 Nature/Outdoor Scene (Dark/Tripod Used) –
  • 1: Not displayed during movie recording.
  • 2: Displayed when all the following conditions apply.
    The shooting scene is dark, it is a night scene, and the camera is mounted on a tripod.

Note

  • For certain scenes or shooting conditions, the icon displayed may not match the actual scene.
  • The icon may blink when [Shooting: Assist] is set to [Advanced ] ().

Image Stabilizer Icons

When the Shooting mode is set to Scene Intelligent Auto, the optimal image stabilization is automatically set according to the shooting conditions, and the following icons are displayed.

Image stabilization for still images (Normal)
Image stabilization for still images when panning (Panning)*1

Image stabilization for angular camera shake and shift-shake in macro shots (Hybrid IS). For movies, [] is displayed and [] image stabilization is also applied.
Image stabilization for movies, reducing strong camera shake, as when recording while walking (Dynamic)

Stop image stabilization when the camera is mounted on a tripod, etc. However, [] is displayed during movie recording, and image stabilization is applied to reduce the impact of vibration due to wind, etc. (Tripod IS).

When [IS mode] is set to [Off] under [Shooting: IS (Image Stabilizer) mode], the Image Stabilizer icons are not displayed.

1: Displayed when shooting (panning) while following a moving subject with the camera. When following a subject that is moving in the horizontal direction, compensation is only applied to camera shaking in the vertical direction, and the horizontal compensation stops. In addition, when following a subject that is moving in the vertical direction, compensation is only applied to camera shaking in the horizontal direction.

Playback Screen

Basic information display for still photos

  1. (1) HDR output status/View Assist
  2. (2) Bluetooth function
  3. (3) Wi-Fi signal strength
  4. (4) Wi-Fi function
  5. (5) Battery level
  6. (6) Current image no./Total images/No. of images found
  7. (7) Shutter speed
  8. (8) Aperture value
  9. (9) Exposure compensation amount
  1. (10) Already sent to a computer/smartphone
  2. (11) Rating
  3. (12) Image protection
  4. (13) Folder no.-File no.
  5. (14) Image quality/Edited image/Cropping/Frame Grab
  6. (15) ISO speed
  7. (16) Highlight tone priority

Caution

  • If the image was taken by another camera, certain shooting information may not be displayed.
  • It may not be possible to play back images taken with this camera on other cameras.

Detailed information display for still photos

  1. (1) Aperture value
  2. (2) Picture Style/Settings
  3. (3) Shutter speed
  4. (4) White balance correction/Bracketing
  5. (5) Shooting mode/Frame Grab
  6. (6) White balance
  7. (7) Auto Lighting Optimizer
  8. (8) First image of scene
  9. (9) Image quality/Edited image/Cropping
  1. (10) Exposure compensation amount
  2. (11) Shooting date and time
  3. (12) Histogram (Brightness/RGB)
  4. (13) ISO speed
  5. (14) Highlight tone priority
  6. (15) Metering mode
  7. (16) File size
  8. (17) Flash exposure compensation amount/Bounce/HDR shooting/Multi Shot Noise Reduction
  • For images captured in RAW+JPEG/HEIF shooting, indicates RAW file sizes.
  • Lines indicating the image area are displayed for images taken with the aspect ratio set () and with RAW or RAW+JPEG set for image quality.
  • For images with added cropping information, lines are shown to indicate the image area.
  • During flash photography without flash exposure compensation, [Flash photography without flash exposure compensation] will be displayed.
  • [Bounce flash photography] indicates images shot with bounce flash photography.
  • The dynamic range adjustment amount is shown for images captured in HDR shooting.
  • [Multi Shot Noise Reduction] indicates images processed with Multi Shot Noise Reduction.
  • [Still photo from test shots] indicates test shots for time-lapse movies.
  • [Images created and saved after performing processing] indicates images created and saved by performing resizing, cropping, or frame-grabbing.
  • [Cropping (images)] indicates images cropped and then saved.

Detailed information display for movies

  1. (1) Movie playback
  2. (2) Movie recording mode/High Frame Rate mode
  3. (3) Movie recording size
  4. (4) Frame rate
  1. (5) Compression method
  2. (6) Movie orientation information
  3. (7) Recording time/Time code
  4. (8) Movie recording format
  • For simplicity, explanations are omitted for items that are also included in basic/detailed information display for still photos, which are not shown here.

Note

  • During movie playback, “*, *” is displayed for the [Fineness] and [Threshold] parameters of [Sharpness] in [Picture Style].