Other Menu Functions

Exposure comp.

Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Exposure Compensation.

ISO speed settings

• ISO speed

  In [] mode, you can set the ISO speed manually. You can also select ISO Auto.

• Max for Auto

  You can set the maximum limit for ISO Auto in movie recording in [] mode or in [] mode with ISO Auto.

  [H(25600)] is added as an option in [Max for Auto] when [1: ISO expansion] in [: Custom Functions(C.Fn)] is set to [1:Enable].

Auto Lighting Optimizer

Brightness and contrast can be corrected automatically. For details on Auto Lighting Optimizer, see Auto Lighting Optimizer.

Highlight tone priority

You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see Highlight Tone Priority.

Auto slow shutter

You can choose whether to record movies that are brighter than when set to [Disable] by automatically slowing the shutter speed under low light.

Available in [] recording mode. Applies when the frame rate of the movie recording size is or .

• Disable

  Enables you to record movies with smoother, more natural movement, less affected by subject shake than when set to [Enable]. Note that under low light, movies may be darker than when set to [Enable].

• Enable

  Enables you to record brighter movies than when set to [Disable] by automatically reducing the shutter speed to 1/30 sec. (NTSC) or 1/25 sec. (PAL) under low light.

White balance

For details on white balance, see White Balance Settings.

Custom White Balance

For details on custom white balance, see [] Custom White Balance.

WB correction

For details on white balance correction, see White Balance Correction.

Picture Style

For details on Picture Styles, see Picture Style Selection.

Lens aberration correction

For details on lens aberration correction, see Lens Aberration Correction.

AF method

For details on AF methods, see AF Method.

Eye detection

For details on eye detection, see Eye Detection.

Focus mode

For details on focus modes, see Focus Mode.

MF peaking settings

For details on MF peaking settings, see MF Peaking Settings (Outline Emphasis).

Lens electronic MF

For details on lens electronic MF, see Lens Electronic MF.

Remote control

By setting to [Enable], you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately). First, pair the BR-E1 with the camera ().

With Wireless Remote Control BR-E1

For normal movie recording, set the release timing/movie shooting switch to , then press the release button.

For time-lapse movie recording, see Time-Lapse Movies.

IS (Image Stabilizer) mode

For details on configuring image stabilization, see Image Stabilizer (IS Mode).

Metering timer

For details on the metering timer, see Metering Timer.

Shooting info. disp.

For details on configuring shooting information display, see Shooting Information Display.

VF display format

For details on the viewfinder display format, see Viewfinder Display Format.

HDMI info disp

You can configure information display for image output via an HDMI cable.

• With info

  The image, shooting information, AF points, and other information is shown on the other device via HDMI. Note that the camera screen goes off. Recorded movies are saved to the card.

• Clean / output

  HDMI output consists solely of 4K movies. Shooting information and AF points are also displayed on the camera, but no image is recorded to the card. Note that Wi-Fi communication is not available.

• Clean / output

  HDMI output consists solely of Full HD movies. Shooting information and AF points are also displayed on the camera, but no image is recorded to the card. Note that Wi-Fi communication is not available.