Tab Menus: AF (Still Photos)

AF1
- (1) AF operation
- (2) AF area
- (3) Whole area tracking Servo AF
- (4) Subject to detect
- (5) Eye detection
- (6) Switching tracked subjects
- (7) Focus mode
Note
- When lenses without a focus mode switch are used, [Focus mode] is displayed on the [1] tab.
AF2
- (1) Case 1
- (2) Case 2
- (3) Case 3
- (4) Case 4
- (5) Case A
- (6) Tracking sensitivity
- (7) Accel./decel. tracking
AF3
- (1) One-Shot AF release prior.
- (2) Preview AF
- (3) Lens drive when AF impossible
- (4) AF-assist beam firing
AF4
- (1) Touch & drag AF settings
- (2) Limit AF areas
- (3) AF area selection control
- (4) sensitivity- AF pt select
- (5) Orientation linked AF point
- (6) Limit subject to detect
- (7) L/R eye detection
AF5
- (1) MF peaking settings
- (2) Focus guide
- (3) Movie Servo AF
AF6
- (1) Electronic full-time MF
- (2) Lens electronic MF
- (3) Focus/control ring
- (4) Focus ring rotation
- (5) RF lens MF focus ring sensitivity

In Basic Zone modes, the following screens are displayed.

Note that available menus vary by shooting mode.

AF1
- (1) AF area
- (2) Whole area tracking Servo AF
- (3) Subject to detect
- (4) Eye detection
- (5) Focus mode
AF2
- (1) Preview AF
- (2) AF-assist beam firing
AF3
- (1) Touch & drag AF settings
- (2) sensitivity- AF pt select
AF4
- (1) MF peaking settings
- (2) Focus guide
- (3) Movie Servo AF
AF5
- (1) Focus ring rotation
- (2) RF lens MF focus ring sensitivity