Part Names

  1. (1)Catchlight panel (shown stowed)
  2. (2)Wide panel (shown stowed)
  3. (3)Flash head (light-emitting unit)
  4. (4)Color filter detector
  5. (5)External flash metering receiver
  6. (6)Optical transmission wireless receiver
  7. (7)AF-assist beam emitter
  8. (8)Mounting foot
  1. (9)Mounting foot locking pin
  2. (10)Contacts
  3. (11)External power source socket
  4. (12)Bounce adapter detector
  5. (13)Terminal cover
  6. (14)Battery compartment cover
  7. (15)Battery compartment cover lock
  8. (16)Sync terminal

Note

  • Not equipped with remote release terminal (release cable SR-N3 cannot be used).
  1. (1)Bounce adapter / color filter attachment part
  2. (2)LINK Radio transmission confirmation lamp
  3. (3)LCD panel
  4. (4)SUB MENU Sub menu button
  5. (5)LAMP LAMP button
  6. (6)Undo Undo button
  7. (7)Mounting foot lock lever
  8. (8)Lock-release button
  9. (9)Bounce angle index
  10. (10)Bounce lock-release button
  1. (11)Joystick

    ZOOM Zoom

    MODE Flash mode

    Wireless / linked shooting setting Wireless / linked shooting setting

    Flash exposure compensation / flash output setting Flash exposure compensation / flash output setting

  2. (12)Power switch

    Power ON Power ON

    LOCK Button / dial lock (Power ON)

    Power OFF Power OFF

  3. (13)Flash-ready lamp/test flash button Flash-ready lamp / test flash button
  4. (14)Select dial Select dial
  5. (15)Dust-proof and drip-proof adapter

LCD Panel

E-TTL II / E-TTL Autoflash (), Continuous Shooting Priority Mode ()

  1. (1)Flash exposure compensation Flash exposure compensation
  2. (2)ETTL E-TTL II / E-TTL autoflash

    CSP Continuous shooting priority mode

  3. (3)Standard Standard

    Guide number priority Guide number priority

    Even coverage Even coverage

    Bounce Bounce upward

    Short distance flash shooting Bounce downward

    Bounce adapter attached Bounce adapter attached

    Color filter attached Color filter attached

    Temperature increase (flash firing restriction) Temperature increase (flash firing restriction)

    Modeling lamp lit Modeling lamp lit

  4. (4)First-curtain sync First-curtain sync (normal shooting)

    Second-curtain sync Second-curtain sync

    High-speed sync High-speed sync

  5. (5)Flash exposure compensation amount
  6. (6)Effective flash range / shooting distance

    Meter Value in meters

    Feet Value in feet

  1. (7)CHARGE Charge indicator

    A Auto

    M Manual

  2. (8)Zoom Zoom indicator

    Wide panel + bounce warning Wide panel + bounce warning

    Out of flash coverage range warning Out of flash coverage range warning

  3. (9)Flash coverage (focal length)
  4. (10)Battery level indicator
  5. (11)FEB Flash exposure bracketing
  6. (12)FEB sequence
  7. (13)Flash exposure level
  8. (14)F Aperture value

Manual flash ()

  1. (1)M Manual flash
  2. (2)Manual flash output
  1. (3)Manual flash level

Note

  • These are only examples of display. Actual display only shows current settings.
  • The LCD panel is illuminated in response to button or dial operations ().

Stroboscopic flash ()

  1. (1)MULTI Stroboscopic flash
  2. (2)Flash frequency
  1. (3)Flash count

Auto/manual external flash metering ()

  1. (1)Ext.A Auto external flash metering

    Ext.M Manual external flash metering

  2. (2)ISO ISO display
  1. (3)ISO speed

Radio Transmission Wireless Shooting / Optical Transmission Wireless Shooting ( / )

  • Sender unit

    1. (1)SENDER Configured as a sender

      SUB SENDER Configured as a sub-sender*1

    2. (2)Radio transmission wireless Radio transmission wireless

      Optical transmission wireless Optical transmission wireless

    3. (3)Flash mode

      ETTL E-TTL II / E-TTL autoflash

      M Manual flash

      MULTI Stroboscopic flash

      Gr Group firing*1

    4. (4)Sender flash firing ON Sender flash firing ON

      Sender flash firing OFF Sender flash firing OFF

    1. (5)Firing group control
    2. (6)Ch Transmission channel

      AUTO Transmission channel set automatically*1

    3. (7)Wireless radio ID*1
    4. (8)CHARGE Sender / receiver charge indicator
    5. (9)Synchronization speed warning Synchronization speed warning*1
    6. (10)Receiver fully charged Receiver charging completed*1
    7. (11)Flash ratio

    1: Radio transmission wireless Radio transmission wireless only

    1. (1)Receiver fully charged Receiver charging completed*1
    2. (2)Firing group control
    1. (3)Sender / receiver charge indicator
    2. (4)Group firing mode*2

    1: Radio transmission wireless Radio transmission wireless only

    2: Gr Group firing only

    Note

    • Charge indicator 2 is no longer displayed after senders and receivers in radio transmission wireless flash photography are fully charged.
    • ETTL, M, Ext.A, and OFF are available as flash modes for Gr group firing.

  • Receiver unit

    1. (1)Receiver Receiver
    2. (2)Ch Transmission channel
    3. (3)TEST Test flash*1

      REL Remote release*1

      MODEL Modeling flash*1

    1. (4)RECEIVER Configured as a receiver
    2. (5)INDIVIDUAL RECEIVER Individual receiver*2

    1: Radio transmission wireless Radio transmission wireless only

    2: Optical transmission wireless Optical transmission wireless only

Radio transmission: linked shooting ()

  1. (1)LINKED SHOT Linked shooting
  2. (2)SENDER Configured as a sender

    RECEIVER Configured as a receiver

  1. (3)REL Release*1

1: SENDER Only when configured as a sender.

Battery Charger LC-E6

Charger for Battery Pack LP-EL.

  1. (1)Battery slot
  2. (2)Charge lamp
  1. (3)Power plug

Battery Charger LC-E6E

Charger for the Battery Pack LP-EL.

  1. (1) Charge lamp
  2. (2) Battery slot
  1. (3) Power cord
  2. (4) Power cord socket

Included Accessories

  • Speedlite case

    (1) Mini stand storage pocket

    (2) Bounce adapter / color filter housing unit

  • Mini stand

    (3) Mounting part

  • Bounce adapter SBA-EL

  • Color filter SCF-ELOR1

  • Color filter SCF-ELOR2

  • Battery Charger LC-E6/LC-E6E*

  • Battery Pack LP-EL

Battery Charger LC-E6 or LC-E6E is provided (The LC-E6E comes with a power cord).