Quick Control

Quick Control in Still Photo Shooting or Playback

1. Press the button ().

   

2. Select a setting item and set your preferred option.

   
   • To select an item, turn the dial or press up or down.
   • To adjust the setting, turn the or dial, or press left or right. Some items are set by pressing a button after this.
   
   • Press vertically or horizontally to select an item on the screen shown above.
   • To adjust the setting, turn the , , or dial. Some items are set by pressing a button after this.

Quick Control in Movie Recording

As in still photo shooting, press the button to access the Quick Control screen. Each press of the button switches between screens if you have selected ([]) both [Display 1] and [Display 2] in [: Quick Ctrl screen] (), but only the selected screen is displayed if one is selected ([]).

[Display 1]

[Display 2]

Movie recording screen

Use the [Display 1] screen as described in Quick Control in Still Photo Shooting or Playback. Use the [Display 2] screen as follows.

1. Switch pages as needed.

   
   • Turn the or dial to switch pages.
   • You can also switch pages by tapping (A) or swiping left or right.

2. Select an item.

   
   • Turn the dial or press vertically or horizontally to select an item, then press the button.

3. Select an option.

   
   • To select an option, turn the , , or dial or press up or down (or in some cases, left or right).

4. Set an option.

   
   • Press the button to set it.

5. Exit the setting.

   • Press the button to return to shooting standby.