Other Menu Functions
Available options include autoexposure and manual exposure movie recording.
Exposure compensation can be adjusted in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see Exposure Compensation.
ISO speed settings
In  mode, you can set the ISO speed manually. You can also select ISO Auto.
Max for Auto
You can set the maximum limit for ISO Auto in movie recording in  mode or in  mode with ISO Auto.
[H(25600)] is added as an option in [Max for Auto] when [1: ISO expansion] in [: Custom Functions(C.Fn)] is set to [1:Enable].
Auto Lighting Optimizer
Brightness and contrast can be corrected automatically. For details on Auto Lighting Optimizer, see Auto Lighting Optimizer.
Highlight tone priority
You can reduce overexposed, clipped highlights as you record movies. For details on Highlight tone priority, see Highlight Tone Priority.
- [Enhanced] is not available (not displayed) when recording movies with [: Highlight tone priority] set.
Auto slow shutter
You can choose whether to record movies that are brighter than when set to [Disable] by automatically slowing the shutter speed under low light.
Available in  recording mode. Applies when the frame rate of the movie recording size is or .
Enables you to record movies with smoother, more natural movement, less affected by subject shake than when set to [Enable]. Note that under low light, movies may be darker than when set to [Enable].
Enables you to record brighter movies than when set to [Disable] by automatically reducing the shutter speed to 1/30 sec. (NTSC) or 1/25 sec. (PAL) under low light.
- Setting to [Disable] is recommended when recording moving subjects under low light, or when afterimages such as trails may occur.
For details on white balance, see White Balance Settings.
Custom White Balance
For details on custom white balance, see  Custom White Balance.
For details on white balance correction, see White Balance Correction.
For details on Picture Styles, see Picture Style Selection.
Lens aberration correction
For details on lens aberration correction, see Lens Aberration Correction.
Lens electronic MF
For details on lens electronic MF, see Lens Electronic MF.
With Wireless Remote Control BR-E1
For normal movie recording, set the release timing/movie shooting switch to , then press the release button.
For time-lapse movie recording, see Time-Lapse Movies.
VF display format
For details on the viewfinder display format, see Viewfinder Display Format.
HDMI info disp
You can configure information display for image output via an HDMI cable.
The image, shooting information, AF points, and other information is shown on the other device via HDMI. Note that the camera screen goes off. Recorded movies are saved to the card.
Clean / output
HDMI output consists solely of 4K movies. Shooting information and AF points are also displayed on the camera, but no image is recorded to the card. Note that Wi-Fi communication is not available.
Clean / output
HDMI output consists solely of Full HD movies. Shooting information and AF points are also displayed on the camera, but no image is recorded to the card. Note that Wi-Fi communication is not available.