Checking the Type of Access Point
To connect using an access point, check if the access point supports WPS*, which allows easy connection between Wi-Fi devices.
If you do not know if the access point you will use is WPS-compatible, refer to the access point instruction manual or other documentation.
Wi-Fi Protected Setup
When WPS is supported
The following two connection methods are available. Connection can be established more easily with WPS (PBC Mode).
When WPS is not supported
Access Point Encryption
The transmitter supports the following options for [Authentication] and [Encryption settings]. Therefore, when connecting to a detected network manually, the encryption used by the access point must be one of the following.
- [Authentication]: Open system, Shared key, WPA/WPA2-PSK, or WPA/WPA2-Enterprise
- [Encryption settings]: WEP, TKIP, and AES
- If the stealth functions of the access point are active, connection may be disabled. Deactivate the stealth functions.
- When connecting to a network that has a network administrator, ask the administrator about the detailed setting procedures.