Auto Retry if Transfer Fails

If transfer fails, the Network lamp lamp on the camera blinks in red. In this case, press the MENU button and select [Connection: Network settings]. The following screen is displayed.

To resolve the error displayed, see the Responding to Error Messages.

Once the cause of the error is eliminated, the images whose transfer previously failed will be re-transferred automatically. With this option activated, transfer is attempted again automatically after failure, whether automatic transfer is used or captured images are transferred via FTP. Note that when you cancel image transfer or turn off the transmitter or camera, the image will not be re-transferred automatically.

See Batch Transfer and transfer the images.


  • If you prefer not to disconnect from the LAN, set [Power saving] on the [FTP transfer settings] screen () to [Disable].