Menu Operations and Settings

Basic Zone Menu Screen

In Basic Zone modes, some tabs and menu items are not displayed.

Display the menu screen.
- Press the button to display the menu screen.
Select a tab.
- Each time you turn the dial, the main tab (group of functions) will switch. You can also switch tabs by pressing the button.
- Turn the dial to select a secondary tab.
Select an item.
- Turn the dial to select an item, then press the button.
Select an option.
- Turn the dial to select an option.
- The current setting is indicated in blue.
Set an option.
- Press the button to set it.
Exit the setting.
- Press the button to return to shooting standby.

Note

The description of menu functions hereafter assumes that you have pressed the button to display the menu screen.
Menu operations are also possible by tapping the menu screen or using .
To cancel the operation, press the button.

Example: When set to single shooting drive mode

Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it.

You can see the overriding function by selecting the dimmed menu item and pressing the button.

If you cancel the overriding function's setting, the dimmed menu item will become settable.

Caution

You may not be able to see the overriding function for certain dimmed menu items.

Note

You can reset menu functions to the default settings by selecting [Basic settings] in [: Reset camera] ().