Connecting to a Smartphone or Tablet

You can do the following after pairing the camera with a smartphone.

  • Establish a Wi-Fi connection using only the smartphone ().
  • Establish a Wi-Fi connection with the camera even when it is off ().
  • Geotag images with GPS information acquired by the smartphone ().
  • Control the camera remotely from a smartphone ().

You can also do the following after connecting the camera to a smartphone via Wi-Fi.

  • Browse and save images on the camera from a smartphone ().
  • Control the camera remotely from a smartphone ().
  • Send images to a smartphone from the camera ().

Note

  • You can also establish an advanced Wi-Fi connection to smartphones without using Bluetooth ().

Preparing the Smartphone

Turning on Bluetooth and Wi-Fi on a Smartphone

Turn on Bluetooth and Wi-Fi from the smartphone settings screen. Note that pairing with the camera is not possible from the smartphone's Bluetooth settings screen.

Installing Camera Connect on a Smartphone

The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed.

  • Use the latest version of the smartphone OS.
  • Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.

Note

  • For the operating system versions supported by Camera Connect, refer to the download site of Camera Connect.
  • Sample screens and other details in this manual may not match the actual user interface elements after camera firmware, Camera Connect, Android, or iOS updates.

Bluetooth Pairing and Wi-Fi Connection to Smartphones

  1. Select [Communication functions: Connect to smartphone(tablet)] ().

  2. Select [Add a device to connect to].

    • When automatically transferring images to a smartphone during shooting, set [Send to smartphone after shot] ().

  3. Select [OK].

    • This screen is not displayed if [Wi-Fi settings] and [Bluetooth settings] are already set to [Enable].
    • A message is displayed if the camera is already paired with another device. Select [OK] to end the current Bluetooth connection.

  4. Press Quick Control/Set.

  5. Start pairing.

    • Press Quick Control/Set to start pairing.
    • If Camera Connect is not installed, use the smartphone to scan the QR code on the screen, go to Google Play or App Store to install Camera Connect, then press Quick Control/Set to start pairing.

  6. Start Camera Connect.

    • Following the instructions in the app, select the camera for pairing.

  7. Establish a Bluetooth connection.

    • When a message appears on the smartphone, use the smartphone as indicated.
    • Press Quick Control/Set.

  8. Complete the connection process.

    • Press Quick Control/Set.
    • The name of the connected device is displayed.

Caution

  • The camera cannot be connected to two or more devices at the same time via Bluetooth. To switch to a different smartphone for the Bluetooth connection, see Reconnecting via Wi-Fi/Bluetooth.
  • Keep in mind that the battery level may be low the next time you want to use the camera, because Bluetooth connections consume battery power even when the camera is off or auto power off is activated.
  • Troubleshooting pairing
  • Keeping pairing records for previously paired cameras on your smartphone will prevent it from pairing with this camera. Before you try pairing again, remove pairing records for previously paired cameras from your smartphone's Bluetooth settings screen.

  1. Tap a Camera Connect function.

  2. Confirm that the devices are connected via Wi-Fi.

    • After a Wi-Fi connection is established, the camera screen switches to shooting standby.

    • Selecting [Communication Functions: Connect to smartphone(tablet)] will display the [Communicating] screen on the camera ().

The Wi-Fi connection to a smartphone is now complete.

  • To end the Wi-Fi connection, select [Disconnect] on the [Communicating] screen.
  • Terminating the Wi-Fi connection will switch the camera to the Bluetooth connection.
  • To reconnect, start Camera Connect and tap the function you will use.

[Communicating] screen

  • Send to smartphone after shot

    Images can be transferred to a smartphone automatically ().

  • Confirm Wi-Fi settings

    You can check setting details.

  • Error details

    After any Wi-Fi connection errors, you can check the error details ().

  • Disconnect

    Terminates the Wi-Fi connection.

Main Functions of Camera Connect

Images on camera

  • Images can be browsed, deleted, or rated.
  • Images can be saved on a smartphone.
  • Effects can be applied to RAW images and saved to a smartphone.

Remote live view shooting

  • Enables remote shooting as you view a live image on the smartphone.

Auto transfer

  • Enables camera and app setting adjustment for automatic transfer of your shots ().

Bluetooth remote controller

  • Enables remote control of the camera from a smartphone paired via Bluetooth. (Not available when connected via Wi-Fi.)
  • Auto power off is disabled while you are using the Bluetooth remote controller feature.

Camera settings

  • Camera settings can be changed.

Updating camera firmware

  • Enables camera firmware updates.

Note

  • For details on other functions, you can check the main Camera Connect screen.

Maintaining a Wi-Fi Connection When the Camera Is Off

You can use a smartphone to browse images on the camera or perform other operations even when the camera is off, as long as it is paired to the smartphone via Bluetooth.

If you prefer not to stay connected to the camera via Wi-Fi/Bluetooth when it is off, either set [Wireless features: Airplane mode] to [On] or set [Wireless features: Bluetooth settings] to [Disable].

Caution

  • This function can no longer be used if the wireless settings are reset or the smartphone connection information is erased.

Editing/Deleting Devices for Connections

Before editing or deleting connection settings for other devices, end the Wi-Fi connection.

  1. Select [Communication functions: Connect to smartphone(tablet)] ().

  2. Select [Edit/delete device].

  3. Select the intended device.

  4. Select an option.

Changing device nicknames

You can change the nickname of devices the camera connects to.

Deleting connection information

You can delete the connection information.

Reconnecting Using Connection Information

The configured connection information can be used to connect again.

  1. Select [Communication functions: Connect to smartphone(tablet)] ().

  2. Select the device for the connection.

    • Select the connection option in the list of past connections.

  3. Follow the on-screen instructions to connect the camera to the device.

Automatic Image Transfer to a Smartphone as You Shoot

Your shots can be automatically sent to a smartphone. Before following these steps, make sure that the camera and smartphone Wi-Fi connection is terminated.

  1. Select [Wireless features: SmartphoneConnect to smartphone(tablet)] ().

  2. Select [Send to smartphone after shot].

  3. Set [Auto send] to [Enable].

  4. Set [Size to send].

Sending Images to a Smartphone from the Camera

You can use the camera to send images to a smartphone connected via Wi-Fi.

Displaying the menu screen

  1. Switch to playback.

  2. Press Quick Control/Set.

  3. Select [Send images to smartphone].

    • If you perform this step while connected via Bluetooth, a message is displayed requesting you to establish a Wi-Fi connection. After pressing Quick Control/Set, tap a Camera Connect function to connect via Wi-Fi, then start again from step 1.

  4. Browse images.

    • Turn the Quick control dial 1 dial to select images to send, then press Quick Control/Set.
    • Images can be selected by touch from index display ().

  5. Press Quick Control/Set.

    • The menu is displayed.

Setting the quality to send

  1. Select [Quality to send].

    Sample screen

    • You can select the image quality of the movies to send.

Note

  • When sending multiple movies, you can change the [Quality to send] on the confirmation screen before sending.
  • Selecting compression for movies applies to all movies sent at that time. However, the following movie formats are not compressed.
    • Movies recorded in Full HD29.97 fps (NTSC), Full HD25.00 fps (PAL), or Full HD23.98 fps (NTSC) sizes

Setting the size of images to send

  1. Select [Size to send].

    Sample screen

    • Select the image size to send.

Note

  • When sending multiple images, you can also change [Size to send] as needed on the confirmation screen before sending.
  • Selecting the reduced size for still photos applies to all still photos sent at that time. Note that Small 2 size still photos are not reduced.

Sending the current image

  1. Select [Send img shown].

    • Press Quick Control/Set with [Send img shown] selected to immediately send the image.

Selecting and sending images

  1. Select [Send selected].

  2. Select images to send.

    • Turn the Quick control dial 1 dial to select images to send, then press Quick Control/Set.
    • To switch to selecting images from 3-image display, press the zoom lever toward Index. To return to single-image display, press the zoom lever toward Magnify.
    • After selecting the images to send, press the MENU button.
    • Select [OK] after a message is displayed.

  3. Select an option.

    • You can change the [Quality to send] () and [Size to send] ().

  4. Select [Send].

Sending a selected range of images

  1. Select [Send range].

  2. Specify the range of images.

    • Select the first image (start point).
    • Next, select the last image (end point). A checkmark [Check] will be appended to all the images within the range between first and last images.
    • To cancel the selection, repeat this step.
    • To change the number of images shown in index display, press the zoom lever toward Magnify or Index.

  3. Press the MENU button.

    • Select [OK] if a message is displayed.

  4. Select an option.

    • You can change the [Quality to send] () and [Size to send] ().

  5. Select [Send].

Sending all images on a card

  1. Select [Send all card].

  2. Select an option.

    • You can change the [Quality to send] () and [Size to send] ().

  3. Select [Send].

Sending images found by searching

Send all the images that match the search conditions set in [Playback: Set image search conditions] at once. For details on [Playback: Set image search conditions], see Setting Image Search Conditions.

  1. Select [Send all found].

  2. Select an option.

    • You can change the [Quality to send] () and [Size to send] ().

  3. Select [Send].

Ending image transfer

  • Press the MENU button on the image transfer screen.
  • To end the Wi-Fi connection, select [Disconnect] on the [Communicating] screen.

Caution

  • During the image transfer operation, a picture cannot be taken even if the camera's shutter button is pressed.

Note

  • You can cancel the image transfer by selecting [Cancel] during the transfer.
  • You can select up to 999 files at a time.
  • With a Wi-Fi connection established, disabling the smartphone's power saving function is recommended.
  • When you use a battery to power the camera, make sure it is fully charged.