Movie Aperture-Priority AE

You can set your preferred aperture value for movie recording. ISO speed and shutter speed are set automatically to suit the brightness and obtain standard exposure.

  1. Set the aperture value (1).

    • Set it by looking at the screen as you turn the Main dial dial.

  2. Focus and record the movie.

Caution

  • Avoid adjusting the aperture value while recording movies, which will record changes in exposure caused by aperture adjustment.

Note

  • Notes for [Movies], [Shutter-priority AE (movies)], [Aperture-priority AE (movies)], [S&F movie auto exposure], [S&F movie shutter-priority AE], and [S&F movie aperture-priority AE] modes

  • You can lock the exposure (AE lock) by pressing the button assigned to AE locking. For details, see Customize Buttons for Shooting.
  • Exposure compensation can be set in a range of up to ±3 stops by pressing the Exposure compensation button.
  • In [Movies] mode, the ISO speed, shutter speed, and aperture value are not recorded in movie Exif information.
  • The camera supports automatic Speedlite LED light activation under low light. For details, refer to the Instruction Manual of the EX series Speedlite equipped with an LED light.