White Balance

White balance (WB) is for making the white areas look white. Normally, the Auto [Auto white balance] (Ambience priority) or [] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object.

  1. Press the Multi-function button (Timer 8 sec.).

    • With an image displayed on the screen, press the Multi-function button.
  2. Select the white balance item.

    • Turn the Quick control dial 1 dial to select the white balance setting item.
  3. Select a white balance setting.

    • Turn the Main dial dial to make a selection.

Note

  • For [Auto white balance] and [Auto: White priority] setting instructions, see [] Auto White Balance.
  • To set your preferred color temperature, select [Color temperature] in [Shooting: White balance], then turn the Main dial dial.
(Approx.)
Display Mode Color Temperature (K: Kelvin)
Auto (Ambience priority) 3000–7000
Auto (White priority)
Daylight 5200
Shade 7000
Cloudy, twilight, sunset 6000
Tungsten light 3200
White fluorescent light 4000
When using Flash Automatically set*
Custom 2000–10000
Color temperature 2500–10000

Applicable with Speedlites having a color temperature transmission function. Otherwise, it will be fixed to approx. 6000K.

White Balance

The human eye adapts to changes in lighting so that white objects look white under all kinds of lighting. Digital cameras determine white from the color temperature of lighting and, based on this, apply image processing to make color tones look natural in your shots.

[] Auto White Balance

With [Auto white balance] (Ambience priority), you can slightly increase the intensity of the image's warm color cast when shooting a tungsten-light scene.

If you select [] (White priority), you can reduce the intensity of the image's warm color cast.

  1. Select [Shooting: White balance].

  2. Select [Auto white balance].

    • With [Auto white balance] selected, press the INFO button.
  3. Select an option.

Caution

  • Precautions when set to [] (White priority)

  • The warm color cast of subjects may fade.
  • When multiple light sources are included in the scene, the warm color cast of the picture may not be reduced.
  • When using flash, the color tone will be the same as with [Auto white balance] (Ambience priority).

[] Setting a Color Temperature

A value can be set representing the white balance color temperature.

  1. Select [Shooting: White balance].

  2. Set the color temperature.

    • Select [Color temperature].
    • Turn the Main dial dial to set a color temperature, then press SET.
    • The color temperature can be set from approx. 2500K to 10000K in 100K increments.

Note

  • When setting the color temperature for an artificial light source, set the white balance correction (magenta or green bias) as necessary.
  • When setting [Color temperature] to a value measured with a commercially available color temperature meter, take some test shots in advance and adjust the setting as needed to compensate for any difference between the color temperature meter and the camera.