Rating Images

You can rate images on a scale of 1–5 (Rating mark 1/Rating mark 2/Rating mark 3/Rating mark 4/Rating mark 5). This function is called rating.

Rating images can help you organize them.

Rating Individual Images

  1. Select [Playback: Rating].

  2. Select [Select images].

  3. Select the image to be rated.

    • Turn the Quick control dial dial to select the image to be rated.
  4. Rate the image.

    • Press the Quick Control/Set button so that the current rating is outlined in blue, as shown.
    • Turn the Quick control dial dial to select a rating mark, then press the Quick Control/Set button.
    • When you append a rating mark to the image, the number beside the set rating will increase by one.
    • To rate another image, repeat steps 3 and 4.

Rating by Specifying the Range

While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once.

  1. Select [Select range].

    • Select [Select range] in [Playback: Rating].
  2. Specify the range of images.

    • Select the first image (start point).
    • Next, select the last image (end point). A checkmark [Check] will be appended to all the images within the range between first and last images.

    • To select other images, repeat step 2.
  3. Press the MENU button.

  4. Rate the image.

    • Turn the Main dial dial to select a rating mark, then select [OK].

      All the images in the specified range will be rated (same rating) at once.

Rating All Images in a Folder or on a Card

You can rate all the images in a folder or on a card at once.

  • Under [Playback: Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.
  • Turn the Main dial dial to select a rating, then select [OK].
  • When you are not rating images or canceling the rating, select [OFF].
  • If the search conditions are set with [Playback: Set image search conditions] (), the display will change to [All found images].
  • If you select [All found images], all the images filtered by the search conditions will be rated as specified.

Note

  • Values next to ratings are displayed as [###] if more than 1,000 images have that rating.
  • With [Playback: Set image search conditions] and [Playback: Image jump w/Main Dial], you can display only the images given a specific rating.