Cropping

You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped.

Select [: Cropping].
Select an image.
- Use the keys to select the image to crop.
Set the cropping frame.
- Press to display the cropping frame.
- The image area within the cropping frame will be cropped.
- Resizing the cropping frame size
  
  Use the or button to resize the cropping frame. The smaller the cropping frame, the more magnified the cropped image will look.
- Changing the cropping frame aspect ratio and orientation
  
  Use the dial to select . Press to change the cropping frame's aspect ratio.
- Moving the cropping frame
  
  Use the keys to move the frame vertically or horizontally. Move the cropping frame until it covers the desired image area.
- Correcting tilt
  
  You can correct image tilt by ±10°. Use the dial to select , then press . While checking tilt relative to the grid, turn the dial (in 0.1° increments) or tap the left or right arrow (in 0.5° increments) in the upper left of the screen to correct tilt. After completing the tilt correction, press .
Check the image area to be cropped.
- Use the dial to select .
  
  The image area to crop is displayed.
Save the image.
- Use the dial to select .
- Select [OK] to save the cropped image.
- Check the destination folder and image file number, then select [OK].
- To crop another image, repeat steps 2 to 5.

Caution

The position and size of the cropping frame may change depending on the angle set for tilt correction.
Once a cropped image is saved, it cannot be cropped again or resized.
AF point display information () and Dust Delete Data () will not be appended to the cropped images.