Part Names
- LCD Panel
- Battery Charger LC-E6 (Sold Separately)
- Battery Charger LC-E6E (Sold Separately)
- Included Accessories
- (1)Catchlight panel (shown stowed)
- (2)Wide panel (shown stowed)
- (3)Flash head (light-emitting unit)
- (4)Modeling lamp / AF-assist beam emitter
- (5)Mounting foot
- (6)Mounting foot locking pin
- (7)Battery compartment cover
- (8)Contacts
- (9)Mounting foot cover
Note
- Not equipped with remote release terminal (release cable SR-N3 cannot be used).
- (1)
Radio transmission confirmation lamp
- (2)LCD panel
- (3)
Sub menu button
-
(4)
LAMP button
- (5)
Undo button
- (6)Mounting foot lock lever
- (7)Lock-release button
- (8)Bounce angle index
- (9)Joystick
Menu direct
Flash mode
Wireless / linked shooting setting
Flash exposure compensation / flash output setting
- (10)Power switch
Power ON
Button / dial lock (Power ON)
Power OFF
- (11)
Flash-ready lamp / test flash button
- (12)
Select dial
- (13)Dust-proof and drip-proof adapter
LCD Panel
E-TTL II / E-TTL autoflash ()
- (1)
Flash exposure compensation
-
(2)
E-TTL II / E-TTL autoflash
/
/
Custom flash mode*1
-
(3)
Standard
Guide number priority
Even coverage
Bounce upward
Bounce downward
Temperature increase (flash firing restriction)
Modeling lamp lit
-
(4)
First-curtain sync (normal shooting)
Second-curtain sync
High-speed sync
- (5)Flash exposure compensation amount
- (6)Effective flash range / shooting distance
Value in meters
Value in feet
-
(7)
Charge indicator
Auto
Manual
-
(8)
Zoom indicator
Wide panel + bounce warning
Out of flash coverage range warning
- (9)Flash coverage (focal length)
- (10)Battery level indicator
- (11)
Flash exposure bracketing
- (12)FEB sequence
- (13)Flash exposure level
- (14)
Aperture value
1: The flash mode is identified after the indicator for the current Custom flash mode.
Manual flash ()
-
(1)
Manual flash
/
/
Custom flash mode*1
- (2)Manual flash output
- (3)Manual flash level
1: The flash mode is identified after the indicator for the current Custom flash mode.
Stroboscopic flash ()
-
(1)
Stroboscopic flash
/
/
Custom flash mode*1
- (2)Flash frequency
- (3)Flash count
1: The flash mode is identified after the indicator for the current Custom flash mode.
Radio transmission wireless flash photography ()
-
Sender unit
-
(1)
Configured as a sender
Configured as a sub-sender
-
(2)
Radio transmission wireless
-
(3)Flash mode
E-TTL II / E-TTL autoflash
Manual flash
Stroboscopic flash
Group firing
/
/
Custom flash mode*1
-
(4)
Sender flash firing ON
Sender flash firing OFF
- (5)Firing group control
-
(6)
Transmission channel
Transmission channel set automatically
- (7)Wireless radio ID
- (8)
Sender / receiver charge indicator
- (9)
Modeling lamp indicator
- (10)
Receiver fully charged
- (11)Flash ratio
1: The flash mode is identified after the indicator for the current Custom flash mode.
- (1)
Receiver fully charged
- (2)Firing group control
- (3)Sender / receiver charge indicator
- (4)
Modeling lamp indicator
- (5)Group firing mode*1
1:
Group firing only
Note
is no longer displayed after senders and receivers in radio transmission wireless flash photography are fully charged.
,
,
, and
are available as flash modes for
group firing.
- As an indicator of modeling lamp illumination commands,
on firing group control information does not necessarily correspond to the current status of receiver modeling lamps.
-
(1)
-
Receiver unit
- (1)
Receiver
- (2)
Transmission channel
- (3)Wireless radio ID
-
(4)
Test flash
Remote release
Modeling flash
- (5)
Configured as a receiver
- (1)
Radio transmission: linked shooting ()
-
(1)
Linked shooting
/
/
Custom flash mode*1
-
(2)
Configured as a sender
Configured as a receiver
- (3)
Release*2
1: The flash mode is identified after the indicator for the current Custom flash mode.
2: Only when configured as a sender.
Battery Charger LC-E6 (Sold Separately)
Charger for Battery Pack LP-EL.
- (1)Battery slot
- (2)Charge lamp
- (3)Power plug
Battery Charger LC-E6E (Sold Separately)
Charger for the Battery Pack LP-EL.
- (1) Charge lamp
- (2) Battery pack slot
- (3) Power cord
- (4) Power cord socket
Included Accessories
-
Speedlite case
(1) Mini stand storage pocket
-
Mini stand
(2) Mounting part
-
Battery Pack LP-EL