Quick Control

You can directly select and set the settings displayed on the screen.

In Viewfinder Shooting

Press the button ().
Select a setting item.
- Press the keys for selection.
Creative Zone
- Press .
- Some items can be set by turning the or dial without pressing .
Basic Zone
- Press .
- Some items can be set by turning the or dial without pressing .
Select an option.
- Turn the or dial to adjust the setting. Some items are set by pressing a button after this.
- Press to return to the previous screen.
- To access the corresponding setting screen from the Quick Control screen, press the button, then adjust the setting by turning the or dial.
- If you have selected [], press the button to adjust the setting. To exit the setting, press the button.

Press the button ().
Select a setting item.
- Press the keys for selection.
Select an option.
- Turn the or dial to adjust the setting. Some items are set by pressing a button after this.
- Press the button to return to the previous screen.

Press the button.
Select a setting item.
- Press the keys for selection.
Select an option.
- Turn the or dial to adjust the setting. Some items are set by pressing a button after this.
- Configure items labeled with a [] icon on the bottom of the screen by pressing .
- To cancel this operation, press the button.
- Press the button to return to the previous screen.

Caution

For image rotation, set [: Auto rotate] to [On] (). When [: Auto rotate] is set to [On] or [Off], images will be tagged with your selected [ Rotate stills] option but not rotated on the camera.

Note

Pressing the button during index display will switch to single-image display and show the Quick Control screen. Pressing the button again will return to the index display.
For images from other cameras, available options may be restricted.