Direct Transfer

When connected to EOS Utility and while the main screen of EOS Utility is displayed, you can transfer images to a computer using the camera.

Selecting the Images to Transfer

  1. Select [Wireless settings: Image transfer].

  2. Select [Image sel./transfer].

  3. Select [Direct transfer].

  4. Select [Sel.Image].

  5. Select the images to transfer.

    • Select the images to transfer by using Quick Control Dial, then press SET.
    • Display [Check mark] on the screen's upper left by using Quick Control Dial, then press SET.
    • You can turn the Quick control dial 2 dial counterclockwise to switch to selecting images from 3-image display. To return to the single-image display, turn Quick control dial 2 clockwise.
    • To select other images to transfer, repeat step 5.
    • After selecting the images, press MENU.
  6. Select [Direct transfer].

  7. Select [OK].

    • The selected images are transferred to the computer.

Selecting Multiple Images

You can select the selection method and transfer multiple images.

  1. Display the [Image sel./transfer] screen.

  2. Select [Multiple].

  3. Select the method you want to use to select images.

    • Select range

      • Select [Select range]. Selecting the first and last images of the range marks all the images in the range with a [Check mark], and one copy of each image will be sent.
      • To change the number of images in index display, turn the Quick control dial 2 dial.
    • In a folder

      • Selecting [Folder images not transfer'd] selects all unsent images in the selected folder.
      • Selecting [Folder images failed transf.] selects all images in the selected folder for which transfer failed.
      • Selecting [Clear folder transf. history] clears the transfer history of images in the selected folder. After clearing the transfer history, you can select [Folder images not transfer'd] and transfer all images in the folder again.
    • On a card

      • Selecting [Card images not transferred] selects all unsent images on the selected card.
      • Selecting [Card images failed transfer] selects all images on the selected card for which transfer failed.
      • Selecting [Clear card's transf. history] clears the transfer history of images on the selected card. After clearing the transfer history, you can select [Card images not transferred] and transfer all images on the card again.
  4. Select [Direct transfer].

  5. Select [OK].

    • The selected images are transferred to the computer.

Transferring RAW+JPEG/RAW+HEIF Images

You can specify how to transfer RAW+JPEG or RAW+HEIF images.

  1. Select [Wireless settings: Image transfer].

  2. Select the type of images to transfer.

    • RAW+JPEG transfer

      • Select [RAW+JPEG transfer], then select [JPEG only], [RAW only], or [RAW+JPEG].
    • RAW+HEIF transfer

      • Select [RAW+HEIF transfer], then select [HEIF only], [RAW only], or [RAW+HEIF].

Caution

  • During image transfer, certain menu options cannot be used.

Note

  • This setting switches in tandem with the [Transfer type/size] screen's [RAW+JPEG transfer] and [RAW+HEIF transfer] settings ().
  • Image transfer in progress is paused if you switch to movie mode.