Setting Exposure Compensation

Exposure compensation can be performed with the remote control.

  1. Connect the remote control to the camera.

    • Connect the remote control and camera using the Bluetooth function. ()

  2. Set the camera.

    • Select a shooting mode that allows exposure compensation.

  3. Set the remote control switch.

    • Set the zoom/lock/exposure compensation switch to Exposure Compensation.

  4. Set exposure compensation.

    • Move the exposure compensation lever. Moving it to Positive compensation will make the image brighter, and moving it towards Negative compensation will make the image darker.
    • Exposure compensation is adjusted with each individual press of the lever. Holding down the lever does not continually make adjustments to exposure compensation.