Terminal Connection

    Connect the terminal and access point with a wireless or wired connection. Multiple terminals can be connected. The receiver camera can be operated from any of the terminals.

Wireless Connection

  1. Launch the [Settings].

  2. Select the access point that the camera is connected to in [Wi-Fi].

Wired Connection

  1. Connect the terminal and access point with a LAN cable.

    • Use a commercially available Ethernet (LAN) adapter to connect the terminal and LAN cable.

  2. Launch the [Settings].

  3. Select [Ethernet].

  4. Select [Manual] for [Configure IP].

  5. Enter the IP address.

    • Enter the IP address and subnet mask configured in the receiver camera.