Before Disposal

Caution

  • DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATIONS.

Note

  • A screwdriver for M1.4 Phillips head screws is recommended for screw removal.
  1. Turn the camera off.

  2. Insert the blade of a small regular screwdriver into the lens cover notch and pry upward to remove it.

  3. Pry the card/terminal cover up, swing it open 90°, and remove it.

  4. Remove the five screws.

  5. Remove the camera body cover as shown.

  6. Tilt the camera as shown and slide the battery out.