Part Names
- (1)Catchlight panel (shown stowed)
- (2)Wide panel (shown stowed)
- (3)Flash head (light-emitting unit)
- (4)Bounce adapter detector
- (5)Color filter detector
- (6)Mounting foot
- (7)Mounting foot locking pin
- (8)Contacts
- (9)Mounting foot cover
- (1)
Radio transmission confirmation lamp
- (2)LCD panel
- (3)
Sub menu button
- (4)
Flash-ready lamp / test flash button
- (5)
Undo button
- (6)Mounting foot lock lever
- (7)Lock-release button
- (8)Color filter mount
- (9)Bounce angle index
- (10)Bounce adapter mount
- (11)Battery compartment cover
- (12)Power switch
Power ON
Button / dial lock (Power ON)
Power OFF
- (13)
Select dial
- (14)
Select/Set button
- (15)
Cross keys
Menu direct
Flash mode
Wireless / linked shooting setting
Flash exposure compensation / flash output setting
- (16)Dust-proof and drip-proof adapter
LCD Panel
E-TTL II / E-TTL autoflash ()
-
(1)
First-curtain sync (normal shooting)
Second-curtain sync
High-speed sync
-
(2)
E-TTL II / E-TTL autoflash
/
/
Custom flash mode*1
-
(3)
Standard
Guide number priority
Even coverage
Bounce
Bounce adapter attached
Color filter attached
Temperature increase (flash firing restriction)
- (4)Effective flash range / shooting distance
Value in meters
Value in feet
-
(5)
Charge indicator
Auto
Manual
-
(6)
Zoom indicator
Wide panel + bounce warning
Out of flash coverage range warning
- (7)Flash coverage (focal length)
- (8)Flash exposure compensation amount
- (9)
Flash exposure compensation
- (10)Flash exposure level
- (11)
Aperture value
1: The flash mode is identified after the indicator for the current Custom flash mode.
Manual flash ()
-
(1)
Manual flash
/
/
Custom flash mode*1
- (2)Manual flash output
- (3)Manual flash level
1: The flash mode is identified after the indicator for the current Custom flash mode.
Radio transmission wireless flash photography ()
-
Sender unit
-
(1)
Configured as a sender
Configured as a sub-sender
-
(2)
Radio transmission wireless
-
(3)Flash mode
E-TTL II / E-TTL autoflash
Manual flash
Group firing
/
/
Custom flash mode*1
-
(4)
Sender flash firing ON
Sender flash firing OFF
-
(5)
Transmission channel
Transmission channel set automatically
- (6)Wireless radio ID
- (7)
Sender / receiver charge indicator
- (8)
Synchronization speed warning
- (9)Firing group control
- (10)Flash ratio
- (11)
Receiver fully charged
1: The flash mode is identified after the indicator for the current Custom flash mode.
- (1)
Receiver fully charged
- (2)Firing group control
- (3)Group firing mode*1
1:
Group firing only
Note
is no longer displayed after senders and receivers in radio transmission wireless flash photography are fully charged.
,
,
, and
are available as flash modes for
group firing.
-
(1)
-
Receiver unit
-
(1)
Radio transmission wireless
- (2)
Receiver
- (3)
Configured as a receiver
- (4)Firing group
-
(5)
Test flash
Remote release
Modeling flash
-
(1)
Radio transmission: linked shooting ()
-
(1)
Linked shooting
/
/
Custom flash mode*1
-
(2)
Configured as a sender
Configured as a receiver
- (3)
Release*2
1: The flash mode is identified after the indicator for the current Custom flash mode.
2: Only when configured as a sender.
Included Accessories
-
Speedlite case
(1) Mini stand storage pocket
-
Mini stand
(2) Mounting part