Uploading Images to image.canon

Link the camera to image.canon to send images directly from the camera.

• A smartphone with a browser and internet connection is required.
• For instructions on how to use image.canon services and details on countries and regions where it is available, visit the image.canon site (https://image.canon/).
• Separate ISP connection and access point fees may apply.

1. Select [: Upload to image.canon] ().

2. Select [OK].

   
   • This screen is not displayed if [: Wi-Fi settings] is already set to [Enable].

3. Select [Connect].

   
   • If the dedicated app has not been installed, select [Install].

4. Select [OK].

   

5. Scan the QR code with the dedicated app.

   
   • Select [OK].

6. Establish a Wi-Fi connection.

   
   • For instructions on configuring communication functions, see Basic Communication Settings.

7. Confirm that the number is displayed in the dedicated app.

   
   • Select [OK].

8. Set up automatic image transfer.

   
   • [When charging battery (high power)]: Auto send starts when the camera is off and connected to a power source to charge it over USB. Note that auto send will start after the camera has been charged for a while if the remaining capacity is initially low.
   • [When camera is turned on]: Auto send starts when the camera is turned on.
   • Select [OK] and then press .

9. Complete the settings.

   
   • The setting menu is displayed ().

   Note

   • The [] icon changes to [].

     

10. Check the dedicated app.

    • Confirm that the camera model name is registered in the dedicated app.

[Upload to image.canon] screen

• Auto send

  You can change the auto send settings.

• Movie(s) to send

  You can select the type of movies uploaded.

• Still image(s) to send

  You can select the type of still photos uploaded.

• Switch network

  You can change the settings for Wi-Fi connections.

• Clear camera web link settings

  You can clear the camera web link settings.