Uploading Images to image.canon

Link the camera to image.canon to send images directly from the camera.

A smartphone with a browser and internet connection is required.
You will need to enter an email address used on the smartphone.
For instructions on how to use image.canon services and details on countries and regions where it is available, visit the image.canon site (https://image.canon/).
Separate ISP connection and access point fees may apply.

Select [: Upload to image.canon].
Select [OK].
- This screen is not displayed if the Wi-Fi setting is already set to [Enable].
Select [Connect].
- If the dedicated app has not been installed, select [Install].
Select [OK].
Scan the QR code with the dedicated app.
- Select [OK].
Establish a Wi-Fi connection.
- Connect to an access point via Wi-Fi. Follow the instructions for the connection method used.
  - Connecting via WPS (, )
  - Connecting manually to detected networks ()
  - Connecting manually by specifying access point information ()
Confirm that the number is displayed in the dedicated app.
- Select [OK].
Set up automatic image transfer.
- Complete the [Auto send] setting item as needed.
- [When charging battery (high power)]: Auto send starts when the camera is off and connected to a power source to charge it over USB. Note that auto send will start after the camera has been charged for a while if the remaining capacity is initially low.
- [When camera is turned on]: Auto send starts when the camera is turned on.
- Select [OK], then press the button.
Complete the settings.
- Press the button.
Note
- The [] icon changes to [].
- The camera model name is registered at image.canon.