Protecting Images

You can protect important images from being accidentally erased.

Caution

  • If you format the card (), the protected images will also be erased.

Note

  • Once an image is protected, it cannot be erased by the camera's erase function. To erase a protected image, you must first cancel the protection.
  • If you erase all the images (), only the protected images will remain. This is convenient when you want to erase all unneeded images at once.
  • Voice memos can be added to protected images. For images with existing voice memos, additional voice memo recording is also possible.

Protecting Individual Images via the Menu

  1. Select [Playback: Protect images].

  2. Select [Select images].

  3. Select the image to protect.

    • Turn the Quick control dial 1 dial to select an image to protect.
  4. Protect the image.

    • Press SET to protect the selected image, after which it will be labeled with a [Protect] icon (1) at the top of the screen.
    • To cancel protection and clear the [Protect] icon, press SET again.
    • To protect another image, repeat steps 3 and 4.

Note

  • You can protect individual images during playback by pressing the RATE button when [Playback: RATE/Voice memo button function] is assigned to [Protect(Hold:Record memo)] ().

Specifying the Range of Images to Protect

While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once.

  1. Select [Select range].

    • Select [Select range] in [Playback: Protect images].
  2. Specify the range of images.

    • Select the first image (start point).
    • Next, select the last image (end point). The images in the specified range will be protected and the [Protect] icon will appear.
    • To select another image to protect, repeat step 2.

Protecting All Images in a Folder or on a Card

You can protect all the images in a folder or on a card at once.

  • When you select [All images in folder] or [All images on card] in [Playback: Protect images], all the images in the folder or on the card will be protected.
  • To cancel protection, select [Unprotect all images in folder] or [Unprotect all images on card].
  • If the search conditions are set with [Playback: Set image search conditions] (), the display will change to [All found images] and [Unprotect all found].
  • If you select [All found images], all the images filtered by the search conditions will be protected.
  • If you select [Unprotect all found], the protection of all the filtered images will be canceled.