Specifications

Printing Method

Printing method

Dye-sublimation thermal transfer

Printing resolution

300×300 dpi

Gradation

256 shades per color

Color Ink / Paper Set

Color ink

Yellow, magenta, cyan

With overcoating

Paper size

Postcard size

Paper specifications Paper size
Before separated at perforations After separated at perforations
Photo paper 100.0×177.0 mm
(3.94×6.97 in.)		 100.0×148.0 mm
(3.94×5.83 in.)

L size

Paper specifications Paper size
Before separated at perforations After separated at perforations
Photo paper 89.0×148.0 mm
(3.50×5.83 in.)		 89.0×119.0 mm
(3.50×4.69 in.)

Card size

Paper specifications Paper size Label sheet size
Before separated at perforations After separated at perforations
Photo paper 83.0×86.0 mm
(3.27×3.39 in.)		 54.0×86.0 mm
(2.13×3.39 in.)

Full-size label

Entire surface is a label

 54.0×86.0 mm
(2.13×3.39 in.)

Label

8-label sheet

 22.0×17.3 mm
(0.87×0.68 in.)
Square label 54.0×54.0 mm
(2.13×2.13 in.)

Printing Speed

(Approx. time, in sec.)
Print finish Postcard size L size Card size
Glossy 41 35 23
Semi-gloss/Satin 56 47 30

Measurement conditions: Room temperature, from the initial yellow printing pass until ejection

Monitor

Type

TFT LCD color monitor

Screen size

3.5-inch (aspect ratio of 3:2)

External Interface

Card slot

Insertion

Direct insertion SD, SDHC, SDXC memory cards
With adapter miniSD, miniSDHC, microSD, microSDHC, microSDXC memory cards

UHS-II is not supported.

Applications

Printing from memory cards

Digital terminal

Terminal type

USB Type-C

Transmission

USB 2.0

Applications / connection method

Applications Connection method
For computer communication

IFC-100U

Commercially available USB cables should not exceed 2.5 m (8.2 ft.)
For printing from USB flash drives USB flash drives FAT / exFAT format only
USB charging/power supply Not provided

Power Source

External power source

Compact Power Adapter CA-CP300 B

Battery pack

NB-CP2LI, NB-CP2LH

Power consumption

Printing 60 W or less
Standby 4 W or less

Compact Power Adapter CA-CP300 B

Rated input 100–240 V AC (50/60 Hz), 0.88 A (100 V)–0.43 A (240 V)
Rated output 24 V DC, 1.8 A
Operating temperature 0–40°C (32–104°F)

Battery Pack NB-CP2LH (sold separately)

Type Rechargeable lithium-ion battery
Nominal voltage 22.2 V DC
Nominal capacity 1290 mAh
Charging cycles Approx. 300 times
Operating temperature 5–40°C (41–104°F)

Battery Pack NB-CP2LI (sold separately)

Type Rechargeable lithium-ion battery
Nominal voltage 21.6 V DC
Nominal capacity 1900 mAh
Charging cycles Approx. 300 times
Operating temperature 5–40°C (41–104°F)

Dimensions and Weight

Dimensions

Width × Height × Depth 182.2×57.6×133.0 mm (7.17×2.27×5.24 in.)

Including rubber soles

Weight

Approx. 850 g (Approx. 29.98 oz.)

Printer body only

Operating Environment

Operating temperature

5–40°C (41–104°F)

Operating humidity

20–80%

Wi-Fi

Specifications

Conforms to IEEE 802.11b/g

Frequency

2.4 GHz band

Channels

1 to 11 ch

Communication modes

Communication mode Max number of simultaneous connections Security protocol
Connection via Wi-Fi router

Access point connections

Wi-Fi Protected Setup supported.
  • WEP*
  • WPA-PSK (TKIP/AES)
  • WPA2-PSK (TKIP/AES)
  • WPA3-SAE (AES)*
  • None

Not supported when connected via Wi-Fi Protected Setup
Direct connection

Printer serves as a basic access point for device connections

Internet connection may not be available for some smartphones.

 8
  • WPA2-PSK (AES)
  • WPA3-SAE (AES)*
  • None

Even with a smartphone that supports WPA3-SAE, connection may not be established depending on the OS version or using environment
Connect with SELPHY Photo Layout Printer serves as a basic access point for connections to SELPHY Photo Layout 1
  • WPA2-PSK (AES)
  • WPA3-SAE (AES)*

Even with a smartphone that supports WPA3-SAE, connection may not be established depending on the OS version or using environment