Still Photo Extraction from RAW Burst Images

You can extract any image from the sets (“rolls,” ) that are captured in RAW burst mode as a JPEG, HEIF, or RAW image.

  1. Switch to playback.

    • Press the Playback button.
  2. Select a roll.

    • Turn the Quick control dial dial to select a roll.
    • In single-image display, rolls are identified by a [SETRAW burst] icon in the upper left.
    • In index display, press the Quick Control/Set button to switch to single-image display.

    Note

    • Various settings may have a different effect on rolls than on extracted JPEG/HEIF images or on JPEG/HEIF images processed from extracted RAW images.
  3. In single-image display, press the Quick Control/Set button.

    • The playback Quick Control screen is displayed.
  4. Play the roll.

    • Press the Quick Control/Set button.
  5. Select an image.

    • Turn the Quick control dial dial to select the image to extract.
    • To delete unneeded portions at the beginning and end of the roll, press the Erase button ().
  6. Press the Quick Control/Set button.

  7. Select an image format and save the extracted image.

    • With [Extract as JPEG] or [Extract as HEIF], you can choose [Edit and save] and apply RAW image processing () before saving.

Note

  • Images are saved in [FineLarge] quality when you select [Extract as JPEG] or [Extract as HEIF].
  • Creative filters, cropping, and resizing are not available for JPEG/HEIF images extracted from RAW burst images or processed from extracted RAW images.
  • HEIF images extracted from RAW burst images cannot be converted to JPEGs.