Still Photo Extraction from RAW Burst Images

You can extract any image from the sets (“rolls,” ) that are captured in RAW burst mode as a JPEG, HEIF, or RAW image.

Switch to playback.
- Press the button.
Select a roll.
- Turn the dial to select a roll.
- In single-image display, rolls are identified by a [] icon in the upper left.
- In index display, press the button to switch to single-image display.
Note
- Various settings may have a different effect on rolls than on extracted JPEG/HEIF images or on JPEG/HEIF images processed from extracted RAW images.
In single-image display, press the button.
- The roll is played.
Select an image.
- Turn the dial to select the image to extract.
- To delete unneeded portions at the beginning and end of the roll, press the button ().
Press the button.
Select an image format and save the extracted image.
- With [Extract as ] or [Extract as ], you can choose [Edit and save] and apply RAW image processing () before saving.

Note

Images are saved in [] quality when you select [Extract as ] or [Extract as ].
Creative filters, cropping, and resizing are not available for JPEG/HEIF images extracted from RAW burst images or processed from extracted RAW images.
HEIF images extracted from RAW burst images cannot be converted to JPEGs.