Using the Self-Timer

Use the self-timer when you want to be in the picture such as a commemorative photograph.

Press the button ().
- With an image displayed on the screen, press the button.
Select the drive mode item.
- Press the button to select the drive mode item.
Select the self-timer.
- Turn the dial to select the self-timer.
  : Shoot in 10 sec.
  
  : Shoot in 2 sec.
  
  : Shoot continuously in 10 sec. for the specified number of shots*
  
  Set the number of shots taken continuously (2–10), either in [: Drive mode] or on the Quick Control screen.
Take the picture.
- Focus on the subject, then press the shutter button completely.
- To check operation, look at the self-timer lamp, listen for beeps, or watch the countdown in seconds on the screen.
- Self-timer lamp blinking accelerates and the camera beeps quickly approx. 2 sec. before the picture is taken.

Caution

With [], some conditions in continuous shooting may lengthen the shooting interval, such as image quality and use of flash.

Note

[] is used to start shooting without touching the camera (to avoid camera shake) when it is mounted on a tripod for shots such as still lifes or long exposures, for example.
After taking self-timer shots, playing back the image () to check focus and exposure is recommended.
When using the self-timer to shoot yourself, use focus lock () on an object at the same distance as where you will stand.
To cancel the self-timer after it starts, either tap the screen or press the button.
Auto power off time may be extended when the camera is set for remote control shooting.