Screen and Viewfinder Display

You can specify to use the screen or viewfinder for display, to avoid accidentally activating the viewfinder sensor when the screen is open.

  1. Select [Set-up: Screen/viewfinder display].

  2. Select an option.

    • AUTO1: Auto 1 (Vari-angle: only screen)

      Always use the screen for display when it is open.

      Use the screen for display when it is closed and facing you, and switch to the viewfinder when you look through it.

    • AUTO2: Auto 2 (Vari-angle: auto switching)

      Use the screen for display when it is closed and facing you, and switch to viewfinder display when you look through the viewfinder.

    • Viewfinder: Viewfinder

      Always use the viewfinder for display.

    • Screen: Screen

      Always use the screen for display when it is open.

Note

  • You can also switch between viewfinder and screen display by pressing a button you have customized by assigning to switching. With this setting set to [AUTO1] or [AUTO2], the camera responds to the viewfinder sensor accordingly.
  • With [AUTO1] set, the camera does not respond to the viewfinder sensor when the screen is open.