Converting HEIF to JPEG

You can convert HEIF images captured in HDR shooting and save them as JPEG images.

Note

  • JPEGs converted from HEIF images are labeled with [JPEG] (when captured on this camera with firmware Ver. 1.2.0 or later installed).

Converting Individual Images

  1. Select [Playback: HEIF→JPEG conversion].

  2. Select [Select images].

  3. Select an image.

    • Turn the Quick control dial 1 dial to select a HEIF image to convert to JPEG, then press the SET button.
    • To select another image to convert, repeat step 3.
    • Press the Q (Quick Control) button to convert to JPEG.
  4. Save.

    • Select [OK] to save the JPEG image.
    • If there are other images for conversion, select [Yes].
  5. Select the images to use for display.

    • Select [Original image] to use the original HEIF images for display.
    • Select [Processed img.] to use the converted JPEG images for display.

Note

  • Some scenes may look different after conversion if the original and converted images are compared.
  • Conversion is not available for cropped images, or for frame-grab images from 4K movies.

Specifying the Range of Images to Convert

  1. Select [Select range].

  2. Specify the range of images.

    • Select the first image (start point).
    • Next, select the last image (end point). A checkmark [Check] will be appended to all the images within the range between first and last images.
    • To select other images, repeat step 2.
  3. Press the Q (Quick Control) button.

  4. Save.

    • Select [OK] to save the JPEG image.
    • If there are other images for conversion, select [Yes].
  5. Select the images to use for display.

    • Select [Original image] to use the original HEIF images for display.
    • Select [Processed img.] to use the converted JPEG images for display.

Note

  • Some scenes may look different after conversion if the original and converted images are compared.
  • Conversion is not available for cropped images, or for frame-grab images from 4K movies.