Remote Control Shooting

Remote shooting is supported with Wireless Remote Control BR-E1 or Remote Switch RS-60E3 (Bluetooth and wired connections, respectively; sold separately).

Wireless Remote Control BR-E1

You can shoot remotely up to approx. 5 meters/16.4 feet from the camera.

After pairing the camera and BR-E1 (), set the drive mode to [10-sec. self-timer/remote control] or [2-sec. self-timer/remote control] for still photo shooting (). For movie recording, set [Shooting: Remote control] to [Enable].

For operating instructions, refer to the BR-E1 instruction manual.

Note

  • Auto power off time may be extended when the camera is set for remote control shooting.
  • The remote control can also be used for movie recording ().

Remote Switch RS-60E3

Once connected to the camera, the switch enables you to shoot remotely over a wired connection.

For operating instructions, refer to the RS-60E3 instruction manual.

  1. Open the terminal cover.

  2. Connect the plug to the remote control terminal.