Reconnecting via Wi-Fi/Bluetooth

Follow these steps to reconnect to devices or Web services with registered connection settings.

1. Select [: Wi-Fi/Bluetooth connection].

   

2. Select an option.

   
   • Select an option to connect to via Wi-Fi or Bluetooth from the past connections listed. If the option is not listed, turn the dial to switch screens.
   • The history is not displayed when [Connection history] is set to [Hide] ().

3. Operate the connected device.

   [] Smartphone

   • Start Camera Connect.

   • If the smartphone's connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera.

     When directly connecting the camera to a smartphone via Wi-Fi, “_Canon0A” is displayed at the end of the SSID.

   [] Computer

   • On the computer, start the EOS software.

   • If the computer's connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera.

     When directly connecting the camera to a computer via Wi-Fi, “_Canon0A” is displayed at the end of the SSID.

   [] Printer

   • If the printer's connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera.

     When directly connecting the camera to a printer via Wi-Fi, “_Canon0A” is displayed at the end of the SSID.