Customizing Quick Controls

• Resetting the Custom Quick Control Screen or Clearing All Items

1. Select [: Customize Quick Controls].

   

2. Select [Edit layout].

   

3. Select items to remove.

   
   • Turn the dial or use to select an item to remove, then press the button.
   • Items shown on the Quick Control screen are labeled with a checkmark. Items without a checkmark will be removed.

4. Select items to add.

   
   • Turn the dial or use to select an item to add, then press the button.
   • To change the layout, press the button.

5. Change the layout.

   
   • Use the dial to select an item to move, then press the button.
   
   • Use the dial to move the item, then press the button.
   • Press the button to exit setup.

6. Select [Save and exit].

   

7. Review the screen.

   
   • Press the button to check the screen with your settings applied.

Resetting the Custom Quick Control Screen or Clearing All Items

• Select [Reset settings] to restore the default Quick Control screen items and layout.
• Select [Clear all items] to remove all items from the layout, so that no Quick Control screen is displayed when the button is pressed.