Reconnecting via Wi-Fi

Follow these steps to reconnect via Wi-Fi using registered connection settings.

  1. Select [Wireless features: Wi-Fi/Bluetooth connection].

  2. Select an option.

    • Select an option to connect to via Wi-Fi from the displayed history. If the option is not displayed, use the Quick control dial 1 dial to switch screens.
    • If [Connection history] is set to [Do not display], the history will not be displayed ().
  3. Operate the connected device.

    [Smartphone] Smartphone

    • Start Camera Connect.
    • If the smartphone's connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera.

      When directly connecting the camera to a smartphone via Wi-Fi, “_Canon0A” is displayed at the end of the SSID.

    [Computer] Computer

    • On the computer, start the EOS software.
    • If the computer's connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the camera's access point.

      When directly connecting the camera to a computer via Wi-Fi, “_Canon0A” is displayed at the end of the SSID.

    [Transfer images to FTP server] FTP transfer

    • If the FTP server's settings were changed to connect to other devices, restore the settings to connect via Wi-Fi to the camera or the camera's access point.

      When the camera is directly connected to an FTP server via Wi-Fi, “_Canon0A” is displayed at the end of the SSID.