Tab Menus: AF (Still Photos)

• AF1

  
  • (1) AF operation
  • (2) AF method
  • (3) Subject to detect
  • (4) Eye detection
  • (5) Continuous AF
  • (6) Touch & drag AF settings

  Note

  • When lenses without a focus mode switch are used, [Focus mode] is displayed on the [1] tab.

• AF2

  
  • (1) MF peaking settings
  • (2) Focus guide
  • (3) AF-assist beam firing

• AF3

  
  • (1) Case 1
  • (2) Case 2
  • (3) Case 3
  • (4) Case 4
  • (5) Case A
  • (6) Tracking sensitivity
  • (7) Accel./decel. tracking

• AF4

  
  • (1) Lens electronic MF
  • (2) One-Shot AF release prior.
  • (3) Switching tracked subjects
  • (4) Lens drive when AF impossible
  • (5) Limit AF methods
  • (6) AF method selection control
  • (7) Orientation linked AF point

• AF5

  
  • (1) Initial Servo AF pt for
  • (2) Focus ring rotation
  • (3) RF lens MF focus ring sensitivity
  • (4) sensitivity- AF pt select
  • (5) Electronic full-time MF

In [] mode, the following screens are displayed.

• AF1

  
  • (1) Subject to detect
  • (2) Eye detection
  • (3) Continuous AF
  • (4) Movie Servo AF
  • (5) Touch & drag AF settings
  • (6) Focus guide
  • (7) AF-assist beam firing

• AF2

  
  • (1) Focus ring rotation
  • (2) RF lens MF focus ring sensitivity
  • (3) sensitivity- AF pt select